Abstract:Excessive exposure to noises, which corresponds to unwanted and/or unpleasant sounds, poses as a threat to people's health and can cause irritability, insomnia and even hearing loss. To attenuate noises, sound absorbers usually composed of porous materials are widely used. These, which appear as large networks of interconnected pores, are capable of absorbing medium and high sound frequencies, specially, transforming into heat the majority of the sound energy that reaches them. Such dissipations occur due to viscous, thermal and inertial losses resulted from interactions between the solid and fluid phases from which the porous materials are composed of. With the growing demand for acoustic comfort, one of the most important topics in noise control engineering is currently the search for sound absorption materials that provide attenuations in wide frequency ranges with minimum cost, weight and thickness. Fiberglass wool and melamine foam are widely used, and a variety of new porous materials are being developed, such as polymer micro- and nanofiber mats obtained by electrospinning. It is here investigated the acoustic potential of the electrospun polycaprolactone (PCL) fiber mat, normally used as a biomaterial. The sound absorption capacity of a material is given by its sound absorption coefficient ( α ), while its sound insulation capacity is denoted by its transmission loss (TL), and these are normally conflicting. In an impedance tube, through the transfer function and the transfer matrix methods, α and TL curves are here determined for samples of fiberglass wool and melamine foam with 25 mm width, and later these combined with a layer of approximately 0.3 mm of PCL fiber mat. With the addition of a fine layer of those polymeric fibers to both base materials, it was observed expressive gains in the sound absorption and transmission loss potentials in almost all the totality of the frequency range analyzed, which extends from 400 to 2500 Hz. It was also analyzed the morphology of the study materials through Scanning Electron Microscopy (SEM), and their porosities were determined through an optical approach with the aid of X-ray microtomography.

Cellulose Fibers-Based Porous Lightweight Foams for Noise Insulation

Extrusion Foaming Of Lightweight Polystyrene Composite Foams With Controllable Cellular Structure For Sound Absorption Application

Applications of Xylan Derivatives to Improve the Functional Properties of Cellulose Foams for Noise Insulation

Lightweight lignocellulosic foams for thermal insulation

Strong, highly porous and sustainable nanocellulose foam made using bioderived hyperbranched crosslinker for thermal insulation and sound absorption

Ultralight cellulose nanofiber based foams: the effects of material formulation and nanofiber type on mechanical properties and thermal insulation

A comparative study of smart polyurethane foam using RSM and COMSOL multiphysics for acoustical applications: from materials to component

High mechanical strength, flame retardant, and waterproof silanized cellulose nanofiber composite foam for thermal insulation

Lightweight and recyclable hybrid multifunctional foam based cellulose fibers with excellent flame retardant, thermal, and acoustic insulation property

Preparation and Sound Insulation Performance of Superfine Metal Powder/Nitrile-Butadiene Rubber-Polyvinyl Chloride Microcellular Foaming Material

Lightweight, mechanically robust and scalable cellulose-based foam enabled by organic-inorganic network and air drying

Ultra-Porous Nanocellulose Foams: A Facile And Scalable Fabrication Approach

Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool

Hierarchical pore structure based on cellulose nanofiber/melamine composite foam with enhanced sound absorption performance

Cellulose nanofiber-created air barrier enabling closed-cell foams prepared via oven-drying

Betulin Enables Multifunctional Cellulose-Based Insulative Foams with Low Environmental Impacts

Thermal and Sound Insulation Properties of Organic Biocomposite Mixtures

A lightweight, biodegradable, and recyclable cellulose-based bio-foam with good mechanical strength and water stability

Citric Acid‐Crosslinked Highly Porous Cellulose Nanofiber Foam Prepared by an Environment‐Friendly and Simple Process

Multiscale Design for Robust, Thermal Insulating, and Flame Self‐Extinguishing Cellulose Foam

Application of Cellulose and Paper-Based Products in Building Acoustics