Abstract:A multiscale design strategy is proposed to fabricate mechanically robust cellulose foam with well‐balanced attributes including low density, high porosity, flame self‐extinguishing, biodegradability, and process sustainability. This strategy effectively enhances performance through the utilization of physical and ionic cross–linking via cellulose nanofibrils and aluminum ion (Al3+), coupled with structural densification brought about by ice‐crystal templating, cross‐linking, and solvent exchange/evaporation. Cellulose foams are in high demand in an era of prioritizing environmental consciousness. Yet, transferring the exceptional mechanical properties of cellulose fibers into a cellulose network remains a significant challenge. To address this challenge, an innovative multiscale design is developed for producing cellulose foam with exceptional network integrity. Specifically, this design relies on a combination of physical cross–linking of the microfibrillated cellulose (MFC) networks by cellulose nanofibril (CNF) and aluminum ion (Al3+), as well as self‐densification of the cellulose induced by ice‐crystal templating, physical cross–linking, solvent exchange, and evaporation. The resultant cellulose foam demonstrates a low density of 40.7 mg cm–3, a high porosity of 97.3%, and a robust network with high compressive modulus of 1211.5 ± 60.6 kPa and energy absorption of 77.8 ± 1.9 kJ m−3. The introduction of CNF network and Al3+ cross–linking into foam also confers excellent wet stability and flame self‐extinguish ability. Furthermore, the foam can be easily biodegraded in natural environments , re‐entering the ecosystem's carbon cycle. This strategy yields a cellulose foam with a robust network and outstanding environmental durability, opening new possibilities for the advancement of high‐performance foam materials.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a high - performance and environmentally - friendly cellulose foam material with a multi - scale structure design. Specifically, the research aims to overcome the deficiencies of existing cellulose foams in terms of mechanical properties, wet stability, thermal insulation, and flame retardancy. Through an innovative multi - scale design strategy, cellulose foams with the following characteristics are produced: 1. **Mechanical properties**: By combining the microfibrillated cellulose (MFC) network with the nanofibrillated cellulose (CNF) network and using aluminum ions (Al³⁺) for cross - linking, the mechanical strength and energy absorption capacity of the foam are significantly improved. The experimental results show that the prepared cellulose foam has a high compressive modulus (1211.5 ± 60.6 kPa) and energy absorption (77.8 ± 1.9 kJ/m³). 2. **Wet stability**: The introduction of the CNF network and Al³⁺ cross - linking not only enhances the mechanical properties of the foam but also significantly improves its stability in a humid environment, avoiding the problem that traditional cellulose foams are easily disintegrated in water. 3. **Thermal insulation**: Due to its low density (40.7 mg/cm³) and high porosity (97.3%), the prepared cellulose foam exhibits excellent thermal insulation performance, with a thermal conductivity of 40.3 ± 0.6 mW/(m·K), which is comparable to or better than commercial thermal insulation materials such as mineral wool, expanded polystyrene (EPS), and cellulose fibers. 4. **Self - extinguishing property**: The compound formed by the CNF network and Al³⁺ cross - linking can decompose to produce carbon residues, aluminum oxide (Al₂O₃), and water during combustion. These substances form a protective layer, effectively suppressing the spread of the flame, making the foam have good self - extinguishing performance. 5. **Biodegradability and sustainability**: The prepared cellulose foam exhibits excellent biodegradability in soil, with a weight loss of 91.6% within 30 days, and the solvents (such as acetone) used in the production process can be recycled, achieving an environmentally - friendly and sustainable production process. In summary, through the multi - scale design strategy, this paper has successfully addressed the challenges of cellulose foams in terms of mechanical properties, wet stability, thermal insulation, and flame retardancy while maintaining their biodegradability and environmental friendliness, providing new ideas for the development of high - performance foam materials.

Multiscale Design for Robust, Thermal Insulating, and Flame Self‐Extinguishing Cellulose Foam

Constructing a "Micro-Nano Collaboration" Network Via Disk-Milling: Value-enhanced Utilization of Flexible Temperature-Resistant Cellulose Insulation Films.

Lightweight, mechanically robust and scalable cellulose-based foam enabled by organic-inorganic network and air drying

High mechanical strength, flame retardant, and waterproof silanized cellulose nanofiber composite foam for thermal insulation

Nanocellulose interface enhanced all-cellulose foam with controllable strength via a facile liquid phase exchange route

Cellulose-based Composite Thermal-Insulating Foams Toward Eco-Friendly, Flexible and Flame-Retardant.

Lightweight and recyclable hybrid multifunctional foam based cellulose fibers with excellent flame retardant, thermal, and acoustic insulation property

Cellulose nanofiber-created air barrier enabling closed-cell foams prepared via oven-drying

Fabrication of Cellulose–Graphite Foam via Ion Cross-linking and Ambient-Drying

Lightweight, Thermally Insulating, Fire‐Proof Graphite‐Cellulose Foam

Ultralight cellulose nanofiber based foams: the effects of material formulation and nanofiber type on mechanical properties and thermal insulation

A lightweight, biodegradable, and recyclable cellulose-based bio-foam with good mechanical strength and water stability

Microcellular foams simultaneous reinforcing and toughening strategy of combining nano-fibrillation network and supercritical solid-state foaming

Strong, highly porous and sustainable nanocellulose foam made using bioderived hyperbranched crosslinker for thermal insulation and sound absorption

Cellulose microtube/aramid nanofiber composite foam

Cellulose fiber-based and engineered capillary foam toward a sustainable, recyclable, and high-performance cushioning structural material

Cellulose/silica composite microtubular superfoam with excellent flame retardancy, thermal insulation and ablative resistance

Multifunctional hybrid structures made of open-cell aluminum foam impregnated with cellulose/graphene nanocomposites

Self‐Adhesive Polydimethylsiloxane Foam Materials Decorated with MXene/Cellulose Nanofiber Interconnected Network for Versatile Functionalities

Multiscale cellulose-based fireproof and thermal insulation gel materials with water-regulated forms

Betulin Enables Multifunctional Cellulose-Based Insulative Foams with Low Environmental Impacts