Abstract:Electrospun nanocomposite polymer blend poly(vinylidene difluoride-co-hexafluoropropylene) (PVDF-HFP)/poly(methyl methacrylate) (PMMA) membranes with a novel dispersion of x wt % of one-dimensional (1D) TiO2 nanofiber fillers (x = 0.0-0.8 in steps of 0.2) were developed using the electrospinning technique. The developed nanocomposite polymer membranes were activated using various redox agents such as LiI, NaI, KI, and tetrabutyl ammonium iodide (TBAI). Introduction of the 1D TiO2 nanofiber fillers improves the amorphous nature of the blended polymer membrane, as confirmed through X-ray diffraction (XRD) and Fourier transform infrared (FTIR), and yielded an electrolyte uptake of over 480% for a 6 wt % TiO2 nanofiber filler-dispersed sample. PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with the LiI-based redox electrolyte provided a high conductivity of 2.80 × 10-2 S cm-1 and a power conversion efficiency (PCE) of 8.08% to their fabricated dye-sensitized solar cells (DSSCs). The observed better ionic conductivity and efficiency of the fabricated DSSCs could be due to the faster movement of the smaller-ionic-radius (Li) ions entrapped inside the amorphous polymer. This enhanced mobility of ions in the quasi-solid electrolyte leads to faster regeneration of the depleting electrons in the photoanode, resulting in improved efficiency. Further, the achieved high conductivity was analyzed in terms of the dynamics and relaxation mechanisms involved by the ionic charge carriers with complex impedance spectroscopy using a random barrier model and Havriliak-Negami formulation. It was observed that the high-conducting PVDF-HFP/PMMA-1D 6 wt % TiO2 nanofiber fillers with LiI-based redox electrolyte show better ac conductivity parameters such as a σ of 5.82 × 10-2 S cm-1, ωe (12685 rad s-1), τe (0.909 × 10-4 s), and n (0.578). Also, dielectric studies revealed that the high-conducting sample has a higher dielectric constant and subsequently high loss. The J-V characteristics were studied using the equivalent circuit of a single-diode model, and the parameters influencing the photovoltaic performance were determined by Symbiotic Organisms Search (SOS) algorithm. The results suggest that the high-efficient sample possesses a minimum series resistance of 1.33 Ω and a maximum shunt resistance of 997 Ω. Hence, the highest-conducting electrospun-blended polymeric nanocomposite (PVDF-HFP-PMMA-6 wt % TiO2 nanofiber fillers) with LiI-based redox agent and tert-butyl pyridine (TBP) additive as the polymer quasi-solid electrolyte nanofibrous membrane can be a better electrolyte for high-performance dye-sensitized solar cell applications.

Effect of different dosage of gamma irradiation on quasi-solid-state conducting polymer electrolyte and its application as high performance dye-sensitized solar cells

The effect of γ-ray-irradiated conducting polymer electrolyte and its application of dye-sensitized solar cells to building window glass system

Enhancing the Performance of Nanocrystalline TiO2 Dye-Sensitized Solar Cells with Phenothiazine-Doped Blended Solid Polymer Electrolyte

The Effect of Plasticizers on the Polypyrrole-Poly(vinyl alcohol)-Based Conducting Polymer Electrolyte and Its Application in Semi-Transparent Dye-Sensitized Solar Cells

Novel Dispersion of 1D Nanofiber Fillers for Fast Ion-Conducting Nanocomposite Polymer Blend Quasi-Solid Electrolytes for Dye-Sensitized Solar Cells

Post-Fabrication Annealing Effects in Polymer-Nanotube Photovoltaic Cells

Effects of different iodide salts on the electrical and electrochemical properties of hybrid biopolymer electrolytes for dye-sensitized solar cells application

Efficiency enhancement of dye-sensitized solar cell with PVdF-HFP:MPII:NaI quasi-solid-state electrolyte

Mixed cation effect and iodide ion conductivity in electrolytes for dye sensitized solar cells

Carbon nanotubes reinforced poly (methyl methacrylate) polymer composites for the application as classic performance quasi-solid-state dye-Sensitized solar cell electrolytes

Improving the efficiency of polymer solar cells based on chitosan@PVA@rGO composites via gamma-irradiated treatment of rGO nanoparticles

Poly(acrylamide-co-acrylic acid)-based gel polymer electrolytes incorporated with sodium iodide for dye-sensitized solar cells (DSSCs)

Polyvinylidene fluoride‐co‐hexafluoropropylene polymer gel electrolyte‐enabled dye‐sensitized solar cell for sustainable energy

A quasi-solid-state dye-sensitized solar cell based on the stable polymer-grafted nanoparticle composite electrolyte

Microstructural Development and Rheological Study of a Nanocomposite Gel Polymer Electrolyte Based on Functionalized Graphene for Dye-Sensitized Solar Cells

Review on mixed cation effect in gel polymer electrolytes for quasi solid-state dye-sensitized solar cells

Low-Dose Imidazolium Cation Grafted Polymeric Nanotubes for Quasi-Solid-State Dye-Sensitized Solar Cells

The Electrically Conductive Function Of High-Molecular Weight Poly(Ethylene Oxide) In Polymer Gel Electrolytes Used For Dye-Sensitized Solar Cells

Tio2-P4vp Nanocomposite Electrolyte For Dye-Sensitized Solar Cells

Poly(ethylene glycol)/poly(vinylidene) fluoride/TiO2 nanoparticle composite for sandwiched solid-state dye-sensitized solar cells

Effect of modified titanium dioxide photoanode and agarose gel electrolyte on electrochemical studies of dye-sensitized solar cell