Improvement of tensile strength and toughness in aramid/epoxy composites by sequential air plasma and (3-glycidyloxypropyl) trimethoxysilane treatments
Ana Cristina Amparán-Estrada,José de Jesús Ku-Herrera,Gustavo Soria-Arguello,Rosa Martha Jiménez-Barrera,Florentino Soriano-Corral,Carlos Rubio-González,Gustavo Domínguez-Rodríguez,Williams Marcel Caceres-Ferreira,Oscar Fernando Pacheco-Salazar,Ana Cristina Amparán-EstradaJosé de Jesús Ku-HerreraGustavo Soria-ArguelloRosa Martha Jiménez-BarreraFlorentino Soriano-CorralCarlos Rubio-GonzálezGustavo Domínguez-RodríguezWilliams Marcel Caceres-FerreiraOscar Fernando Pacheco-Salazara Departamento de Procesos de Transformación de Plásticos,Centro de Investigación en Química Aplicada,Blvd. Enrique Reyna Hermosillo No. 140,P.C. 25294 Saltillo,Coahuila,Méxicob Departamento de Química Macromolecular y Nanomateriales,CONAHCYT-Centro de Investigación en Química Aplicada,Blvd. Enrique Reyna Hermosillo No. 140,P.C. 25294 Saltillo,Coahuila,Méxicoc Escuela de Ingeniería y Ciencias,Tecnológico de Monterrey,Epigmenio González 500 Fracc. San Pablo,P.C. 76130 Querétaro,Querétaro,Méxicod Centro de Investigación en Corrosión,Universidad Autónoma de Campeche. Av. Héroe de Nacozari No. 480 P.C. 24079 San Francisco de Campeche,Campeche,Méxicoe Unidad de Ingeniería en Materiales,Tecnológico Nacional de México,Instituto Tecnológico Superior de Calkiní (ITESCAM). Avenida Ah Canul S/N por Carretera Federal,Calkiní,P.C. 24900 Campeche,México
DOI: https://doi.org/10.1080/09243046.2024.2324491
IF: 2.92
2024-03-06
Advanced Composite Materials
Abstract:This work explores sequential surface treatments involving atmospheric-air plasma and (3-glycidyloxypropyl) trimethoxysilane (GLYMO) to enhance the tensile properties of aramid/epoxy composites. To prove the technical advantages of this approach, aramid fibers received individual (atmospheric-air plasma or GLYMO) or sequential (plasma followed by GLYMO, and vice versa) surface treatments. Single fiber tensile tests (SFT) and X-ray photoelectron spectroscopy (XPS) were employed to characterize changes in aramid fibers upon the surface modifications. SFT revealed that none of the surface treatments compromised their tensile strength ( σ max ). Applying GLYMO, whether individually or in sequence (GLYMO followed by plasma and plasma followed by GLYMO), led to a significant enhancement in the fibers' elastic modulus ( E ). Composites with plasma-treated fibers displayed a 5% increase in E and an 8.5% increase in σ max , with no changes in toughness. However, the most notable improvements were achieved through sequential plasma followed by GLYMO treatments, resulting in a ~ 10% increase in σ max and a remarkable ~ 40% improvement in toughness. Plasma introduces oxygen-containing groups to the fiber surface, facilitating GLYMO grafting. Subsequent crosslinking of GLYMO with the epoxy resin strengthens the fiber-matrix interface. This sequential surface modification offers an alternative pathway for fabricating composites with superior toughness and σ max .
materials science, composites