Abstract:To develop novel mineral-filled composites and assess their enhanced properties (stiffness, a good balance between mechanical strength and impact resistance, greater temperature stability), a high-impact polypropylene copolymer (PPc) matrix containing an elastomeric discrete phase was melt mixed with natural CaSO4 β-anhydrite II (AII) produced from gypsum rocks. First, in a prior investigation, the PPc composites filled with AII (without any modification) displayed enhanced stiffness, which is correlated with the relative content of the filler. The tensile and impact strengths dramatically decreased, especially at high filling (40 wt.%). Therefore, two key methods were considered to tune up their properties: (a) the ionomeric modification of PPc composites by reactive extrusion (REx) with zinc diacrylate (ZA), and (b) the melt mixing of PPc with AII surface modified with ethylenebis(stearamide) (EBS), which is a multifunctional processing/dispersant additive. The properties of composites produced with twin-screw extruders (TSEs) were deeply assessed in terms of morphology, mechanical, and thermal performance, including characterizations under dynamic mechanical solicitations at low and high temperatures. Two categories of products with distinct properties are obtained. The ionomeric modification by Rex (evaluated by FTIR) led to composites characterized by remarkable thermal stability, a higher temperature of crystallization, stronger interfacial interactions, and therefore noticeable mechanical properties (high tensile strength (i.e., 28 MPa), increased stiffness, moderate (3.3 kJ/m2) to good (5.0 kJ/m2) impact resistance) as well as advanced heat deflection temperature (HDT). On the other hand, the surface modification of AII with EBS facilitated the dispersion and debonding of microparticles, leading to composites revealing improved ductility (strain at break from 50% to 260%) and enhanced impact properties (4.3–5.3 kJ/m2), even at high filling. Characterized by notable mechanical and thermal performances, high whiteness, and a good processing ability, these new PPc–AII composites may be tailored to meet the requirements of end-use applications, ranging from packaging to automotive components.

Influence of Interfacial Adhesion on Stress-Strain Properties of Highly Filled Polyethylene

Effective Enhancement of a Carbon Nanothread on the Mechanical Properties of the Polyethylene Nanocomposite

Effects of different treatments on the interface and mechanical properties of high density polyethylene reinforced by sericite-tridymite-cristobalite

Polyolefin Composites Filled with Magnesium Hydroxide

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Interface Effect on the Mechanical Behaviour of Rigid Particle Filled Polymer

Influence of reactive compatibilization on the mechanical, thermal and rheological properties of highly filled PBT/Al2O3 composites

Interfacial Debonding Behavior of A Rigid Particle-Filled Polymer Composite

The role of the interfacial strength in glass bead filled HDPE

Experimental Analysis of Mechanical Properties about the Glass Bead-filled Polypropylene

Influence of Interfacial Bond Strength on Fatigue Life and Thermo-Mechanical Behavior of a Particulate Composite: An Experimental Study

Emergent mechanical properties in highly filled additively manufactured polymer composites

Time-concentration Superpositioning Principle Accounting for the Reinforcement and Dissipation of High-Density Polyethylene Composites Melts

The effect of filler permittivity on the dielectric properties of polymer-based composites

High Density Polyethylene Composites Reinforced with Hybrid Inorganic Fillers: Morphology, Mechanical and Thermal Expansion Performance

Finite Element Analysis of Interfacial Stress of Mg-Baced Composites Reinforced with Short Fiber

Dual Effects of Mesoscopic Fillers on the Polyethersulfone Modified Cyanate Ester: Enhanced Viscoelastic Effect and Mechanical Properties

Comparative study on the influence of additives on interfacial adhesion strength between fibres and extruded polymer core via peel-off test

Balancing the Strength–Impact Relationship and Other Key Properties in Polypropylene Copolymer–Natural CaSO4 (Anhydrite)-Filled Composites

Toughening of Polypropylene Highly Filled with Aluminum Hydroxide

Temperature-dependence of dynamic rheological properties for high-density polyethylene filled with graphite