Patricia Rivera,Alejandra Torres,Julio Romero,Álvaro Alarcón,Sara Martínez,Marina P. Arrieta,Francisco Rodríguez-Mercado,María José Galotto
Abstract:Expanded polystyrene will account for 5.3% of total global plastic production in 2021 and is widely used for food packaging due to its excellent moisture resistance and thermal insulation. However, some of these packages are often used only once before being discarded, generating large amounts of environmentally harmful plastic waste. A very attractive alternative to the conventional methods used for polymer processing is the use of supercritical carbon dioxide (scCO2) since it has mass-transfer properties adapted to the foam morphology, generating different path lengths for the diffusion of active compounds within its structure and can dissolve a wide range of organic molecules under supercritical conditions. The objective of this research was to evaluate the effect of operational variables on the process of caffeic acid (CA) impregnation and subsequent foaming of polylactic acid (PLA) as well as two PLA/poly(butylene-co-terephthalate-adipate) (PBAT) blends using scCO2. The results showed an increase in the degree of crystallinity of the CA-impregnated samples due to the nucleation effect of the active compound. On the other hand, SEM micrographs of both films and foams showed significant differences due to the presence of PBAT and its low miscibility with PLA. Finally, the results obtained in this work contribute to the knowledge of the important parameters to consider for the implementation of the impregnation and foaming process of PLA and PLA/PBAT blends with potential use in food packaging.
What problem does this paper attempt to address?
The problem this paper attempts to address is: studying the impact of operational variables on the impregnation and foaming process of poly(lactic acid) (PLA) containing caffeic acid (CA) and its blends with poly(butylene adipate-co-terephthalate) (PBAT) under supercritical carbon dioxide (scCO2) conditions. Specifically, the study aims to evaluate the effects of different operational conditions (such as temperature, pressure, contact time, depressurization rate, etc.) on the CA impregnation and the foaming process of PLA and PLA/PBAT blends, to develop sustainable materials with antioxidant activity that can be used for food packaging.
### Background and Significance
- **Environmental Issues**: Traditional expanded polystyrene (EPS) foam, although widely used in food packaging due to its excellent moisture resistance and thermal insulation, causes severe environmental pollution due to its large-scale disposal after single use.
- **Alternative Materials**: Poly(lactic acid) (PLA), as a biodegradable polymer, is considered a potential alternative to EPS. However, PLA itself has issues such as low melt strength, slow crystallization rate, and high brittleness.
- **Modification Methods**: Blending with PBAT can improve the performance of PLA, making it more suitable for food packaging. Additionally, using supercritical carbon dioxide (scCO2) technology for impregnation and foaming can not only enhance material performance but also avoid the use of traditional organic solvents, reducing environmental pollution.
### Research Objectives
- **Evaluate the Impact of Operational Variables**: Study the effects of different operational conditions (such as temperature, pressure, contact time, depressurization rate, etc.) on the CA impregnation and the foaming process of PLA and PLA/PBAT blends.
- **Characterize Material Properties**: Conduct comprehensive structural and thermal performance characterization of the films and foams after impregnation and foaming to evaluate the antioxidant activity of the materials.
- **Application Prospects**: Develop sustainable materials with antioxidant activity that can be used for food packaging, extending the shelf life of food while reducing environmental impact.
### Main Research Content
- **Experimental Materials**: Use PLA, PLA/PBAT blends (two different ratios), caffeic acid (CA), etc.
- **Experimental Methods**: Conduct CA impregnation and foaming using supercritical carbon dioxide technology, studying the effects under different operational conditions.
- **Characterization Methods**: Use various analytical techniques (such as TGA, DSC, FTIR, SEM, etc.) to characterize the materials and evaluate their performance.
### Results and Discussion
- **Impregnation Effect**: The study found that the depressurization rate significantly affects the CA impregnation effect, with slow depressurization favoring CA deposition. Additionally, adding ethanol as a co-solvent can increase the amount of CA impregnation.
- **Foaming Effect**: The foaming effect varies under different operational conditions, and optimizing the operational conditions can yield foam materials with better performance.
- **Antioxidant Activity**: The antioxidant activity of the materials was verified through the DPPH inhibition test, showing that the materials treated with supercritical conditions have high antioxidant capacity.
In conclusion, this study provides important references for developing sustainable materials with antioxidant activity, helping to reduce the environmental impact of traditional plastics and offering new solutions for the food packaging industry.