Abstract:A novel technical solution about helically coiled tube-in-tube (HCTT) heat exchanger with double cooling source is proposed to obtain regeneratively cooled air for advance aeroengine. 54 simulation runs are performed according the Box-Behnken design table, in which the effect of geometrical and operating parameters on performance of heat exchanger are well considered. Grid independence was carefully carried out referring to ASME V&V 20–2009. The simulation model is validated based on comparison with available experimental data and analysis of flow pattern. The performance of the HCTT heat exchanger i.e. entropy generation number Ne, absorption heat ratio of the inner tube η, and out temperature of the regeneratively cooled air Ta,out were evaluated using Response Surface Methodology. The significance of each term in regression model has been checked by analysis of variance. The results shows that all the design variables are significant for predicting Ne, η, and Ta,out, except non-dimensional coil pitch λ for finding η; the regression models have a good prediction performance; outer tube curvature ratio (δo) is the most significant structure parameter affecting Ne and Ta,out, while inner tube curvature ratio (δi) is the most significant linear term for predicting η, indicating that δo and δi are key structure parameters. It also shows that heat transfer characteristics of the HCTT heat exchanger are complicated engineering problem subjected to multi factors interaction. For instance, total number of terms in model for predicting η reaches to 18, including 5 linear terms, 10 interaction terms along with 3 square terms. The influences of all interaction terms on Ne, η, and Ta,out were displayed using 3D surface graph, the effect rule of interaction terms were discussed in details. Desirability function approach was employed to conduct multi-objective optimization for goals of Ta,out = 630 K, and minimum Ne and η. The optimum values of design variable were obtained. This method possesses practical significances for prediction and optimization of HCTT heat exchanger.

Optimization of phase change heat exchanger based on RSM

Improvement of Thermal Performance of Novel Heat Exchanger with Latent Heat Storage

Multi-objective optimization of a plate heat exchanger thermal energy storage with phase change material

Research on the Heat Transfer Performance of Phase Change Heat Storage Heat Exchangers Based on Heat Transfer Optimization

Optimization of heat transfer in PCM based triple tube heat exchanger using multitudinous fins and eccentric tube

Optimization of thermal and flow characteristics of plate heat exchanger with variable structure parameter

Simulation and Optimization Study on the Performance of Fin-and-Tube Heat Exchanger

Structure Optimization of Longitudinal Rectangular Fins to Improve the Melting Performance of Phase Change Materials Through Genetic Algorithm

Multi-objective Optimization of Heat Charging Performance of Phase Change Materials in Tree-Shaped Perforated Fin Heat Exchangers

Analysis and Optimization of Thermo-Hydraulic Characteristics of Phase Change Slurry in Wavy MCHS with Porous Fins Based on RSM and Desirability Methods

Application of performance dynamic equationin numerical simulation and optimization of waste heat utilization and storage system

Analysis, prediction and multi-objective optimization of helically coiled tube-in-tube heat exchanger with double cooling source using RSM

Performance investigation of sleeve tube heat exchanger filled with multi-layer phase change materials

Parametric Study and Optimization of H-type Finned Tube Heat Exchangers Using Taguchi Method

Study on Solidification Characteristics of Bionic Finned Phase Change Heat Exchanger and Multi-Objective Optimization Design

Multi-objective Shape Optimization of a Heat Exchanger Tube Fitted with Compound Inserts

Numerical investigation on enhanced heat transfer in shell-and-tube phase change heat exchanger

Enhancement of thermal energy storage in a phase change material heat exchanger having elliptical and circular tubes with & without fins

Structure optimization and heat transfer research for new type casing phase change heat sequencer

Multi-objective Optimization of a Latent Thermal Energy Storage Unit with Compound Enhancement Method

Phase Change Material Based Heat Sinks and Its Geometry Optimization for Heat Transfer Enhancement