Abstract:Aiming at the problem from the adverse impact of the extreme climate environment of severe cold area on the temperature control and crack prevention of the construction of high RCC gravity dam and taking account of the principle of safe and reliable construction， ensuring construction progress and controlling construction cost， a secondary developed ANSYS finite element program is applied to the simulative optimizations of several temperature control schemes. The result shows that the maximum temperature of the concrete reaches to 42.3 ℃ under the condition without any temperature control measures， and even to 35.6 ℃ after cooling with water pipe yet， thus both of them exceed the control requirement for the maximum temperature planned in the design. After selecting lower concrete placing temperature without the consideration of water pipe cooling， the maximum temperature is 33.8 ℃，which still cannot meet the requirement concerned. Through the comprehensive consideration of both the concrete placing temperature and water cooling， the maximum temperatures of concrete are 29.5 ℃ and 31.5 ℃ respectively， thus can meet the requirement of the temperature control. It is suggested that the concrete placing temperature for the dam body must not exceed 16 ℃ and water cooling is necessary at the same time， furthermore， the temporary insulation must be adopted for the concrete placing surface with the insulation quilt with the thickness of 2 cm and the top surface of the overwinter layer must be at least covered with the insulation quilt with the thickness of 14 cm during the construction， while the permanent insulation with extruded polystyrene board （XPS）with the thickness of 10 cm must be adopted for the dam body as well. The study result has reference value for making a scientific and reasonable temperature control scheme for the dam construction in severe cold area.

Construction Characteristics and Quality Control Measures Under High Altitude and Cold Conditions

Review on Construction Measures for Mass Concrete in Low Temperature in Cold Regions

Sensitivity Analysis of Temperature Control Parameters and Study of the Simultaneous Cooling Zone during Dam Construction in High-Altitude Regions

Microstructures and Properties of Concrete Surfaces under Different Exposure Conditions in Complex Natural Environments of High-Altitude Regions

Study of Freezing Resistance of Hydraulic Concrete in Tibet

Construction Technology of Warm Mix Asphalt Pavement in Cold High-Altitude Areas

Simulation of Thermal Stress and Control Measures for Rock-Filled Concrete Dam in High-Altitude and Cold Regions

Research on the Mechanical Properties of Concrete under Low Temperatures

Experimental Study and Mechanism Analysis on Frost Resistance of Normal Performance Concrete under Different Environments

Experimental investigation on electrical response and mechanical performance of cementitious materials at low temperatures

Effects of alternating positive and negative temperature curing on the mechanical properties of ultra-high performance concrete

Study of Key Techniques of Town Environment Construction in Cold Areas of Some Developed Countries

Optimization and design of temperature control of a high RCC gravity dam in severe cold area

Evaluating the Highway Tunnel Construction in Western Sichuan Plateau Considering Vocational Health and Environment

Study on Bolt Support Design for Carbonaceous Shale Tunnel of Highway at High Altitude and Cold Region

Temperature Field Analytical Solution and Optimization Scheme after Excavation in Large-scale Ground Freezing Projects

An Overview of Smart Materials and Technologies for Concrete Construction in Cold Weather

Optimum selection of temperature control measures for combined intake tower in alpine region during construction period

Study of Methods to Control Frost Action in Cold Regions Tunnels

STUDY ON THE MECHANICAL PERFORMANCE AND INFLUENCING FACTORS OF THE CONCRETE AT SUBZERO TEMPERATURE

Experimental Study on the Mechanical Properties of Q460c Construction Steel at Low Temperature