Abstract:Aiming at the problem from the adverse impact of the extreme climate environment of severe cold area on the temperature control and crack prevention of the construction of high RCC gravity dam and taking account of the principle of safe and reliable construction， ensuring construction progress and controlling construction cost， a secondary developed ANSYS finite element program is applied to the simulative optimizations of several temperature control schemes. The result shows that the maximum temperature of the concrete reaches to 42.3 ℃ under the condition without any temperature control measures， and even to 35.6 ℃ after cooling with water pipe yet， thus both of them exceed the control requirement for the maximum temperature planned in the design. After selecting lower concrete placing temperature without the consideration of water pipe cooling， the maximum temperature is 33.8 ℃，which still cannot meet the requirement concerned. Through the comprehensive consideration of both the concrete placing temperature and water cooling， the maximum temperatures of concrete are 29.5 ℃ and 31.5 ℃ respectively， thus can meet the requirement of the temperature control. It is suggested that the concrete placing temperature for the dam body must not exceed 16 ℃ and water cooling is necessary at the same time， furthermore， the temporary insulation must be adopted for the concrete placing surface with the insulation quilt with the thickness of 2 cm and the top surface of the overwinter layer must be at least covered with the insulation quilt with the thickness of 14 cm during the construction， while the permanent insulation with extruded polystyrene board （XPS）with the thickness of 10 cm must be adopted for the dam body as well. The study result has reference value for making a scientific and reasonable temperature control scheme for the dam construction in severe cold area.

Optimization and design of temperature control of a high RCC gravity dam in severe cold area

Study on Thermal Stress and Temperature Cracks Control of Longlin Roller Compacted Concrete Gravity Dam

Sensitivity Analysis of Temperature Control Parameters and Study of the Simultaneous Cooling Zone during Dam Construction in High-Altitude Regions

Study on temperature control for key components of high concrete dam

Simulation of Thermal Stress and Control Measures for Rock-Filled Concrete Dam in High-Altitude and Cold Regions

Study on Temperature-Stress Simulation of RCC Dam During Construction Period

Simulation and Research on Temperature Field of Taishan Roller Compacted Concrete Gravity Dam

Influence of Permanent Superficial Heat Preservation on the Temperature Stress During the Construction Period of Longhuakou RCC Gravity Dam

Comparison and Selection of Thermal Insulation Materials for RCC Dam Construction in Dry and Cold Valleys at High Altitudes in Tibet

Research on Optimization of Second-Stage Cooling of High Arch Dam Concrete

Intelligent Cooling Control Method and System for Mass Concrete

Research on Concrete Temperature Control Measures in Deep Hole Area of Super High Arch Dam

Influence of Casting Temperature and Solar Radiation on the Thermal Field in Roller Compacted Concrete During Construction

Temperature Control over Concrete Engineering for Works on Inner River of Changzhou Hydraulic Complex

Optimum selection of temperature control measures for combined intake tower in alpine region during construction period

Study on Concrete Thermal Optimum Design of High Arch Dams

Temperature Control Study on Backfill RCC of Shenxigou Hydropower Project

Discussion on concrete temperature control standard for foundation restraint area in alpine region

A new approach of construction progress and quality control of RCC dam

Feedback Design of Temperature Control Measures for Concrete Dams based on Real-Time Temperature Monitoring and Construction Process Simulation

Study on Temperature Drop Effect Caused by Low-temperature Pouring of Concrete Dams