Abstract:With the influence of intense solar radiation heat and the greater temperature difference between day and night, surface concrete with a drastic temperature change can easily experience a great nonlinear temperature difference, which increases the risk of early-age concrete cracking. In this study, a distributed optical fiber temperature sensing (DTS) system is used to monitor the surface temperature gradient of concrete in real time, and a solar radiation heat monitoring test is also carried out based on the Baihetan project. Based on this, a solar radiation loading model and a finite element model of a typical pouring block considering solar radiation are established. Combined with the measured temperature data and different calculation conditions, the surface temperature changes of medium-heat and low-heat concrete experiencing solar radiation are analyzed, and the temperature control effect of surface concrete with different surface insulation measures is further analyzed. The results show that the temperature variation of medium-heat concrete at the same depth is more obvious than that of low-heat concrete. Additionally, the temperature variation of low-heat concrete is noticeable within 20 cm of the top surface. In addition, in an intense solar radiation environment, covering the concrete with a 4- or 5-centimeter-thick polyethylene coil can effectively control the surface temperature gradient and maximum daily amplitude of low-heat concrete, and surface concrete cured by running water has a significant temperature control effect. Therefore, it is suggested that 22–24 °C water temperatures be used for water curing during periods of intense solar radiation during the day and a 4-centimeter-thick polyethylene coil be used for coverage at night. These study results have been employed in the Baihetan project to optimize the temperature control scheme of the pouring blocks.

Influence of Casting Temperature and Solar Radiation on the Thermal Field in Roller Compacted Concrete During Construction

Study on Temperature-Stress Simulation of RCC Dam During Construction Period

Analysis and Measurement of the Temperature Field in the Shimenzi RCC Arch Dam

Simulation and Research on Temperature Field of Taishan Roller Compacted Concrete Gravity Dam

Study on Thermal Stress and Temperature Cracks Control of Longlin Roller Compacted Concrete Gravity Dam

A Simulation Analysis Research on the Material Performance of Resin Concrete

Entire Process Simulation of Temperature and Stress Fields for RCC Dams

Inverse Analysis of Thermal Parameters of Concrete Dam Based on Simulation Analysis

Field Tests on the Evolution of a Real Thermal Field in Concrete

Real time thermal field analysis on Wudongde super high arch dam during construction

Numerical Evaluation of Transient Solar Radiation Effect on Concrete-Faced Rockfill Dam with Dual Mortar Contact Method

Influence of Permanent Superficial Heat Preservation on the Temperature Stress During the Construction Period of Longhuakou RCC Gravity Dam

The Preliminary Study on Temperature Control of Roller Compacted Gravity Dam in Cold and Dry Area

A 3D Thermal Field Restructuring Method for Concrete Dams Based on Real-Time Temperature Monitoring

Experimental Study on Electro-Thermal and Compaction Properties of Electrically Conductive Roller-Compacted Concrete Overwintering Layer in High RCC Dams

Heterogeneous Temperature Characteristics Considering Rainfall Effect During Construction of an Integrally-Poured Rock-Filled Concrete Arch Dam

Simulating Analysis on Temperature Creep Stress of Shapai RCC Arch Dam

Numerical Analysis on Temperature Rise of a Concrete Arch Dam after Sealing Based on Measured Data

Experimental and Numerical Study of the Influence of Solar Radiation on the Surface Temperature Field of Low-Heat Concrete in a Pouring Block

Comparison between calculating forecast and project actual measurement of unstable temperature field for RCC dam

Effect of Unsymmetrical Solar Thermal Radiation on Thermal Stresses of High Arch Dams