Abstract:Al x CoCrFeNi high entropy alloy (HEA) system has received extensive attention of researchers as it shows a dynamic change in phase fraction and properties in response to variation in the Al content. In this study, Al x CoCrFeNi HEAs were welded using a laser beam welding and microstructural evolution and mechanical properties were studied using X-ray diffraction, electron backscatter diffraction, scanning electron microscopy, hardness and tensile tests. Results revealed that, the laser-welded Al 0.3 alloy exhibited an increased tensile strength but a minor decrease in ductility as compared to that of the base metal (BM) Conversely, the laser-welded Al 0.5 and Al 0.7 alloys, characterized by a dual-phase structure, demonstrated a simultaneous decrease in both strength and ductility. The hardness of Al 0.3 increased from 156 HV for base metal (BM) to 197 HV for weld zone (WZ). A drastic drop in the hardness in the fusion zone was observed for Al 0.5 (from 242 HV for BM to 212 HV for WZ) and Al 0.7 (from 387 HV for BM to 260 HV for WZ). The decrease in hardness for welded Al 0.5 and Al 0.7 alloy may be attributed to reduced fraction of secondary BCC/B2 phase in the microstructure. Texture analysis of the welded samples reveals columnar grains with a texture fibre in the welded Al 0.3 and Al 0.5 alloys. However, the welded Al 0.7 alloy has a dendritic structure with random texture due to the enhanced rate of constitutional supercooling arising from the higher fraction of secondary phases. The combined effect of changes in phase distribution, texture, and grain size might be the reasons for the variation in mechanical properties of the welded alloy.

Laser welding of a W-free precipitation strengthened Co-base superalloy

Study on Microstructure of Fiber Laser Welding of CoCrCuFeNi High Entropy Alloy

Microstructural Evolution and Mechanical Properties of Laser Beam Welded AlxCoCrFeNi High Entropy Alloys

Effect of copper on microstructural evolution and mechanical properties of laser-welded CoCrFeNi high entropy alloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Dissimilar laser welding of a CoCrFeMnNi high entropy alloy to 316 stainless steel

Microstructure and Mechanical Properties of Fiber Laser Welded Joints of CoCrFeNiCu High-Entropy Alloy and 304 Stainless Steel

Optimization of Laser Welded Joints of Steel/Al with Pre-placed High-Entropy Alloy Powder

Fatigue behaviour of a laser beam welded CoCrFeNiMn-type high entropy alloy

New Ni-based superalloys designed for laser additive manufacturing

Microstructure and Mechanical Properties of Laser Welded and Post-Weld Heat-Treated K439B Superalloy

Laser beam welding of AlCoCrFeNi2.1 eutectic high-entropy alloy

Microstructural Characterization of Laser Weld of Hot-Stamped Al-Si Coated 22MnB5 and Modification of Weld Properties by Hybrid Welding

Novel welding of Al0.5CoCrFeNi high-entropy alloy: Corrosion behavior

Microstructure and Mechanical Properties of Superalloy Laser Welded Joints for GH3625 Fabricated by Laser Additive

Effect of thermal treatments on the microstructure and local mechanical behaviour of a laser beam welded CoCuFeMnNi high-entropy alloy

The Effects of Co on the Microstructure and Mechanical Properties of Ni-Based Superalloys Prepared via Selective Laser Melting

High Resolution Analysis of Elemental Partitioning in Nickel-Base Superalloy Welds Using Atom Probe Field Ion Microscopy

Microstructure, Macrosegregation, and Mechanical Properties of NiTi to Ti6Al4V Dissimilar Laser Welds Using Co Interlayer

Microstructure evolution and mechanical properties in a gas tungsten arc welded Fe42Mn28Co10Cr15Si5 metastable high entropy alloy

Microstructure and mechanical properties of electron beam welded joints of GH3128 and CoCrFeNi high-entropy alloy