Abstract:Experimental procedures and typical results for the contributions of constituents to the fracture behavior of fiber metal laminate. Fiber metal laminate (FML) is a damage‐tolerant material that has gained special attention in the aircraft industry. To clarify the confusing contributions of constituents to the quasi‐static fracture performance and failure mechanism, six kinds of glass fiber reinforced aluminum laminates (Glare) were designed. Quasi‐static fracture tests were carried out to examine their crack resistance, stable crack extension, and residual strength. Moreover, postmortem characterizations were performed to reveal the macro and micro failure morphologies. It was found that the glass fiber reinforced polymer (GFRP) layers can positively contribute to Glare's quasi‐static fracture performance due to its in‐situ quasi‐brittle but not completely brittle fracture characteristics, which was shown by the special plateau formed on P–Δa curve of Glare, and by the improved crack resistance, longer critical crack length, and higher residual strength in Glare with higher content of GFRP. However, the enhancement achieved by increasing the volume fraction of GFRP was not as effective as by increasing the aluminum thickness, since thickening aluminum in a limited range could increase the fracture toughness and promote the delamination and fiber pull‐outs in Glare. To further identify the effect of the properties of the metal layer, a titanium‐reinforced Glare was designed and tested. It was found to transform the fracture process to be titanium dominant, which delayed the fracture of GFRP and meandered the fracture path, then resulted in superior quasi‐static fracture performance than the basic Glare.

Corrosion damage evolution and mechanical properties of carbon fiber reinforced aluminum laminate

Low Velocity Impact of Carbon Fiber Aluminum Laminates

Investigation on Galvanic Corrosion Behaviors of CFRPs and Aluminum Alloys Systems for Automotive Applications

Experimental and numerical characterization of flexural properties and failure behavior of CFRP/Al laminates

Impact Behavior Analysis of Carbon Fiber Reinforced Aluminum Laminates Based on a Micro-Mechanical Damage Model

Effect of Different Coupling Agents on Interfacial Properties of Fibre-Reinforced Aluminum Laminates

Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP

Enhancing carbon fiber reinforced aluminum laminates with cellulose paper interlayers: experimental characterization of tensile, flexural, and interlaminar fracture toughness

Interlaminar Shear Strength Behavior of Carbon Fiber Reinforced Aluminum Alloy Laminate

Research Progress on Interlaminar Failure Behavior of Fiber Metal Laminates

Al Clad CF/Al Composite Fabricated by a One-Step Liquid–Solid Infiltration–Extrusion Process: Electrochemical Corrosion and Mechanical Behavior

Identifying the contributions of constituents to the fracture performance and failure mechanism of fiber metal laminate

Progressive Damage Behaviour Analysis and Comparison with 2D/3D Hashin Failure Models on Carbon Fibre-Reinforced Aluminium Laminates

The Effect of Self-Healing Microcapsules in Corrosion Testing on Magnesium AZ31 Alloy and Fibre Metal Laminates

Experimental and numerical study on the high-velocity hail impact performance of carbon fiber aluminum alloy laminates

Interlaminar mechanical properties of nano- and short-aramid fiber reinforced glass fiber-aluminum laminates: a comparative study

Heteroatom Modification Enhances Corrosion Durability in High-Mechanical-Performance Graphene-Reinforced Aluminum Matrix Composites

Delamination Behavior of an Advanced Al-Li Alloy Laminate During Fatigue Crack Growth

Homogeneously Dispersed Graphene Nanoplatelets as Long-Term Corrosion Inhibitors for Aluminum Matrix Composites

Study of the dynamic response and damage evolution of carbon fiber/ultra-thin stainless-steel strip fiber metal laminates under low-velocity impact