Abstract:Due to the increasing demand in industrial application, nanofluids have attracted the considerable attention of researchers in recent decades. The addition of nanocellulose (CNC) with water (W) and ethylene glycol (EG) to a coolant for a radiator application exhibits beneficial properties to improve the efficiency of the radiator. The focus of the present work was to investigate the performance of mono or hybrid metal oxide such as Al2O3 and TiO2 with or without plant base-extracted CNC with varying concentrations as a better heat transfer nanofluid in comparison to distilled water as a radiator coolant. The CNC is dispersed in the base fluid of EG and W with a 60:40 ratio. The highest absorption peak was noticed at 0.9% volume concentration of TiO2, Al2O3, CNC, Al2O3/TiO2, and Al2O3/CNC nanofluids which indicates a better stability of the nanofluids’ suspension. Better thermal conductivity improvement was observed for the Al2O3 nanofluids in all mono nanofluids followed by the CNC and TiO2 nanofluids, respectively. The thermal conductivity of the Al2O3/CNC hybrid nanofluids with 0.9% volume concentration was found to be superior than that of the Al2O3/TiO2 hybrid nanofluids. Al2O3/CNC hybrid nanofluid dominates over other mono and hybrid nanofluids in terms of viscosity at all volume concentrations. CNC nanofluids (all volume concentrations) exhibited the highest specific heat capacity than other mono nanofluids. Additionally, in both hybrid nanofluids, Al2O3/CNC showed the lowest specific heat capacity. The optimized volume concentration from the statistical analytical tool was found to be 0.5%. The experimental results show that the heat transfer coefficient, convective heat transfer, Reynolds number and the Nusselt number have a proportional relationship with the volumetric flow rate. Hybrid nanofluids exhibit better thermal conductivity than mono nanofluids. For instance, a better thermal conductivity improvement was shown by the mono Al2O3 nanofluids than the CNC and TiO2 nanofluids. On the other hand, superior thermal conductivity was observed for the Al2O3/CNC hybrid nanofluids compared to the other mono and hybrid ones (Al2O3/TiO2).

Heat Transfer Analysis of Different Coolant in the Waist Tubes of a Radiator and Performance Prediction Based on Artificial Neural Network

Natural convection heat transfer in concentric annuli with nanofluids

Heat transfer and pressure drop of Al 2 O 3 /water nanofluid in conically coiled tubes: Experimental and artificial neural network prediction

Artificial neural network and numerical analysis for performance enhancement of hybrid microchannel-pillar-jet impingement heat sink using Al2O3-water and CuO-water nanofluids

Application of M5 tree regression, MARS, and artificial neural network methods to predict the Nusselt number and output temperature of CuO based nanofluid flows in a car radiator

Neural Network Analysis for Prediction of Heat Transfer of the Aqueous Hybrid Nanofluid Flow in a Variable Porous Space with Varying Film Thickness over a Stretched Surface

Artificial Neural Network analysis on the effect of mixed convection in triangular-shaped geometry using water-based Al2O3 nanofluid

Development of machine learning algorithm for assessment of heat transfer of ternary hybrid nanofluid flow towards three different geometries: Case of artificial neural network

A novel neural network and sensitivity analysis method for predicting the thermal resistance of heat pipes with nanofluids

Predicting and optimizing the heat transfer performance of radiator with functionalized graphene nanofluids

Enhanced heat transfer in novel star-shaped enclosure with hybrid nanofluids: A neural network-assisted study

Experimental study on the thermal and flow characteristics of ZnO/water nanofluid in mini-channels integrated with GA-optimized ANN prediction and CFD simulation

Neural Networks Analysis of Thermal Characteristics on Plate-Fin Heat Exchangers with Limited Experimental Data

Comparison of experimental results with numerical simulation of thermal performance in car radiator using MWCNT/EG/water nanofluid

Heat transfer and second law characteristics of radiator with dissimilar shape nanoparticle-based ternary hybrid nanofluid

Thermal Performance of Hybrid-Inspired Coolant for Radiator Application

Development of a neural architecture to predict the thermal conductivity of nanofluids

FLOW NON-UNIFORMITY AND HEAT TRANSFER IN ANNULAR PLATE-FIN RADIATOR

Heat transfer, and friction factor of Fe3O4–SiO2/Water hybrid nanofluids in a plate heat exchanger: Experimental and ANN predictions

On Aqua-Based Silica (SiO2–Water) Nanocoolant: Convective Thermal Potential and Experimental Precision Evaluation in Aluminum Tube Radiator

Designing machine learning based intelligent network for assessment of heat transfer performance of ternary hybrid nanofluid flow between a cone and a disk: Case of MLP feed forward neural network