Abstract:The sealing of large diameter rotating shaft in some special applications especially in aerospace and military industry needs to be sealed with magnetic fluids. However, the major problems of restricting the application of large diameter magnetic fluid rotary seal is the decrease of the pressure-resistance capacity of magnetic fluid seal at high temperatures and the bigger breakaway torque at low temperatures. To research effect of the temperature on the pressure-resistance capacity and breakaway torque of large diameter magnetic fluid seal, a sealing device with the diameter size of rotary shaft for 190 mm and the sealing gap for 0.1 mm was designed. Through the experimental test studied on the pressure-resistance capacity at -55 degrees C-70 degrees C and the breakaway torque at -55 degrees C-20 degrees C, exploring the influence rules of injection volumes of magnetic fluid and the standing time on the breakaway torque under at -55 degrees C. The experimental results show that the decrease of the saturation magnetization of magnetic fluid at high temperatures result in the pressure-resistance capacity falls, and the increase of the magnetic fluid viscosity at low temperatures is the key factors which causes the bigger breakaway torque. In theory, the analytical expression of between the viscous drag torque and the temperatures were derived, which could qualitatively explain the experimental rules of between the breakaway torque and the temperature at -55 degrees C-20 degrees C. In addition, the breakaway torque of magnetic fluid seal increases as the addition of the standing time and eventually becomes stable at -55 degrees C, and between the breakaway torque and the injection volumes of magnetic fluid showed a linearly change.

Interface stability of magnetic fluid seal for sealing liquid

Analytical and Experimental Study of Sealing Behavior at Water and Magnetic Fluid Interface

Effect of shaft speed on performance of magnetic fluid seal with gas isolation for sealing water

Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment

The Influence of the Thermal Expansion on the Magnetic Fluid Sealing Performance

Design and Performance Study of Magnetic Field Generator of Magnetic Liquid Hydrodynamic Seal

Non-Uniform Distribution of Magnetic Fluid in Multistage Magnetic Fluid Seals

Magnetic field simulation and experimental investigation of magnetic fluid seal based on rotating shaft

Effect of annular seal on stability of a centrifugal pump rotor system

Experimental visualization of the lifetime and self-healing of magnetic fluid seals

Numerical Analysis on Boundary and Flow Regime of Magnetic Fluid in the Sealing Clearance with a Rotation Shaft

Theory Analyses and Applications of Magnetic Fluids in Sealing

Comparative study of the fai lure pressure between seal ing l iquids and gas with magnetic fluid

Mechanism of Magnetic Liquid Flowing in the Magnetic Liquid Seal Gap of Reciprocating Shaft

Modeling ad Hydrodynamic Simulation of Magnetic Fluid Seal Combined with Mechanical Seal

Theoretical Analysis and Experimental Study of the Characteristics of Magnetic Fluid Seal with a Large Diameter at High/low Temperatures

The Study of Magnetic Liquid Used in Linear Seal

Analysis and Experimental Study on Magnetic Fluid Seal Mechanism

Numerical Analysis and Experiment Study of Magnetic Fluid Boundary in Seals

Influence of Magnetic Fluid Evaporation on Pressure Resistance of Magnetic Fluid Seal

Influence of High Viscosity and Magnetoviscous Effect on the Washout Resistance of Magnetic Fluid