Abstract:The sealing of large diameter rotating shaft in some special applications especially in aerospace and military industry needs to be sealed with magnetic fluids. However, the major problems of restricting the application of large diameter magnetic fluid rotary seal is the decrease of the pressure-resistance capacity of magnetic fluid seal at high temperatures and the bigger breakaway torque at low temperatures. To research effect of the temperature on the pressure-resistance capacity and breakaway torque of large diameter magnetic fluid seal, a sealing device with the diameter size of rotary shaft for 190 mm and the sealing gap for 0.1 mm was designed. Through the experimental test studied on the pressure-resistance capacity at -55 degrees C-70 degrees C and the breakaway torque at -55 degrees C-20 degrees C, exploring the influence rules of injection volumes of magnetic fluid and the standing time on the breakaway torque under at -55 degrees C. The experimental results show that the decrease of the saturation magnetization of magnetic fluid at high temperatures result in the pressure-resistance capacity falls, and the increase of the magnetic fluid viscosity at low temperatures is the key factors which causes the bigger breakaway torque. In theory, the analytical expression of between the viscous drag torque and the temperatures were derived, which could qualitatively explain the experimental rules of between the breakaway torque and the temperature at -55 degrees C-20 degrees C. In addition, the breakaway torque of magnetic fluid seal increases as the addition of the standing time and eventually becomes stable at -55 degrees C, and between the breakaway torque and the injection volumes of magnetic fluid showed a linearly change.

Numerical Analysis on Boundary and Flow Regime of Magnetic Fluid in the Sealing Clearance with a Rotation Shaft

Numerical Analysis and Experiment Study of Magnetic Fluid Boundary in Seals

Magnetic field simulation and experimental investigation of magnetic fluid seal based on rotating shaft

The Influence of the Thermal Expansion on the Magnetic Fluid Sealing Performance

Numerical Analysis and Experimental Study on Magnetic Fluid Reciprocating Seals

Research on a Large Diameter Magnetic Fluid Seal with Thin-Wall Parts

Numerical Simulation for Magnetic Fluid Sealing Device

Numerical Calculation of Magnetic Force Exerted on the Shaft in Magnetic Fluid Seal

Numerical and Experimental Study of Magnetic Fluid Seal with Large Sealing Gap and Multiple Magnetic Sources

Analytical and Experimental Study of Sealing Behavior at Water and Magnetic Fluid Interface

Theory Analyses and Applications of Magnetic Fluids in Sealing

The Influence of the Temperature Rise on the Sealing Performance of the Rotating Magnetic Fluid Seal

Non-Uniform Distribution of Magnetic Fluid in Multistage Magnetic Fluid Seals

Magnetic fluid seal critical pressure calculation based on numerical simulations

Analysis on Seal Capacity of Magnetic Fluid Seal Using Ring Magnet

Design of Magnetic Circuit and Simulation of Magnetic Fluid Sealing

Motion State Analysis and Seal Ability Study on the Magnetic Fluid Seal of Reciprocating Shaft

Influence of Viscosity and Magnetoviscous Effect on the Performance of a Magnetic Fluid Seal in a Water Environment

Error Analysis in Numerical Simulation of the Static Pressure Capability of Magnetic Fluid Seals

Numerical Calculation of Nonlinear Dynamic Characteristics for Labyrinth Seals

Theoretical Analysis and Experimental Study of the Characteristics of Magnetic Fluid Seal with a Large Diameter at High/low Temperatures