Effect of ferroelectric material activity on dielectric properties of ferroelectric–dielectric composite ceramics

Jingjing Jin,Le Xin,Shiting Shen,Zhengxin Li,Yuze Xue,Luchao Ren,Xue Guo,Long Chen,Jiwei Zhai,Mingwei Zhang
DOI: https://doi.org/10.1007/s10854-021-05976-6
2021-04-28
Abstract:Ba<sub>0.6</sub>Sr<sub>0.4</sub>TiO<sub>3</sub> ceramic doped with MgO was prepared by a conventional solid state reaction method. The effects of Ba<sub>0.6</sub>Sr<sub>0.4</sub>TiO<sub>3</sub> pre-sintering at different temperatures on the phase composition, microstructure and microwave dielectric properties of composite ceramics were studied. The effect of different pre-sintering temperatures on composite ceramics is mainly reflected in different ion diffusion degree. The results show that the different pre-sintered ceramics have two crystal phases of perovskite structure Ba<sub>0.6</sub>Sr<sub>0.4</sub>TiO<sub>3</sub> and cubic phase MgO. As the pre-sintering temperature increases, the dielectric permittivity of the composite ceramic decreases, and the grain size decreases obviously. When the pre-sintering temperature rises above 1200 °C, the Curie peak of composite ceramic was strongly suppressed and broadened. The tunability at room temperature increases with the increase of the pre-sintering temperature of Ba<sub>0.6</sub>Sr<sub>0.4</sub>TiO<sub>3</sub>, which is due to the lower ion diffusion weakens Tc movement to low temperature. In addition, the loss tangent of the samples at room temperature was kept at a low level. When the pre-sintering temperature of Ba<sub>0.6</sub>Sr<sub>0.4</sub>TiO<sub>3</sub> is 1250 °C, the tunability is up to 29% (at 30 kV/cm), and the best <i>Q</i> value 132 (at 1.37 GHz) was generated which is the most obvious improvement in dielectric properties compared to other pre-sintering temperature. This indicates that with the decrease of ion diffusivity, the properties of the ferroelectric-dielectric composite ceramics were significantly improved.
What problem does this paper attempt to address?