Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. During the last years, the design and production of self-powered engineering structures gained extensive attention due to the shortage of nonrenewable energy resources and the increase in fossil fuel prices. To this end, the current numerical study focused on assessing the forced vibration behavior and energy harvesting capability of a silicon microbeam reinforced with chopped fiber rods (CFRs). This topic is important because it offers a novel approach to generate sustainable energy from ambient vibrations, addressing the growing demand for renewable energy sources while advancing structural health monitoring and smart materials technology. The piezoelectric patch is located at the top surface of the microbeam and is under the distributed harmonic force. The related governed relations are derived using the new theory of the five-parameter beam model, which also accounted for the Poisson effect, and solved by adopting the Galerkin method. The microscale effects are taken into account by employing strain gradient theory. Moreover, the effects of the top and bottom surfaces have accounted for the microbeam using Gurtin and Murdoch's theory. The outcomes of this research indicated that utilizing narrow-short length piezoelectric patches for Silicon microbeams yields the highest available output voltage. Compared to the homogeneous porosity distribution case, as the porosity coefficient reduced in the bottom and top surfaces of the microbeam, the voltage initial rise point decreased by about 13%. By increasing the porosity coefficient to 0.9, both voltage and displacement initial rise points are increased respectively by approximately 32% and 890%. As the piezoelectric patch thickness is decreased from 8[math][math]m to 6[math][math]m while the strain gradient theory is utilized, voltage and displacement initial rise points are increased respectively about 1066.67% and 1[math]200%. Also, a simultaneous increase in CFRs vol. fraction from 5% to 10% and Silicon microbeam thickness from 7[math][math]m to 8[math][math]m caused about 37% improvement in dynamic deflections.

Vibration-Based Energy Harvesting Characteristics of Functionally Graded Magneto-Electro-Elastic Beam Structures Using Lumped Parameter Model

On the size-dependent electromechanical layered beam-type porous functionally graded flexoelectric energy harvesters

Finite Element Analysis and Design of a Magnetostrictive Material based Vibration Energy Harvester with a Magnetic Flux Path

Application of the generalized differential quadrature method to study vibration and dynamic stability of tri-directional functionally graded beam under magneto-electro-elastic fields

A Two-Mass Cantilever Beam Model for Vibration Energy Harvesting Applications

Design and Implementation of Vibration Energy Harvester Based on MSMA Cantilever Beam

Vibration Analysis and Distributed Piezoelectric Energy Harvester Design for the L-shaped Beam

Tapered Galloping Energy Harvester for Power Enhancement and Vibration Reduction

Non-linear modeling of a bi-layer magnetostrictive cantilever considering Δ E effect

Energy Harvesting in a System with a Two-Stage Flexible Cantilever Beam

Energy Harvesting Estimation from Vibration of Chopped Fiber Rod-Reinforced Microbeams with Piezoelectric Patch Based on Five Parameter-Surface-Strain Gradient Beam Model

Modeling and Analysis of Wave Energy Harvester with Symmetrically Distributed Galfenol Cantilever Beams

Analysis of an Array of Flexoelectric Layered Nanobeams for Vibration Energy Harvesting

Dynamic response of auxetic and functionally graded piezoelectric energy harvester using PVDF polymer

Design and experimentation of width tapered meandered array structure for low frequency broadband vibration energy harvesting

Modeling and analysis of a macro-fiber piezoelectric bimorph energy harvester operating in d33-Mode using Timoshenko theory

Modelling and characterisation of a magnetically coupled piezoelectric beam for energy harvesting gear meshing motion

Geometric Nonlinear Distributed Parameter Model for Cantilever-Beam Piezoelectric Energy Harvesters and Structural Dimension Analysis for Galloping Mode

Design and Modeling of A Flexible Longitudinal Zigzag Structure for Enhanced Vibration Energy Harvesting

Modeling and Characteristic Analysis of Combined Beam Tri-Stable Piezoelectric Energy Harvesting System Considering Gravity

The electro-mechanical coupling responses of functionally graded piezoelectric nanobeams with flexoelectric effect