Abstract:Journal of Vibration and Control, Ahead of Print. In this work, a novel meandered 6DoF stepped beam energy harvester that can operate over a broad frequency range is proposed. The hybrid structure has regular beams and zigzag sections that promote greater deformation and bending. The reduced width section in the middle of the beam maintains a low resonance bending frequency and creates a concentrated stress structure. The placement of the piezoelectric layer in this region results in a high-power density. It is found to be a favorable structure to develop using standard microfabrication techniques compared to other broadband harvesters. Also, it can withstand higher mechanical stress and deformation. The proposed structure exhibits wide band characteristics at low frequency and generates higher power output against an array of cantilevers for a given area. The numerical analysis was carried out to select the optimal proof mass that would result in resonance frequencies closely spaced together and yield high output power. Experimental validation on a prototype subsequently confirms the accuracy of the frequency response predicted by the models. When tested under harmonic base excitation of 0.35 g, the harvester generates an average DC power of 374 [math] including signal conditioning losses in the frequency range of 12–27 Hz. The proposed structure offers excellent design flexibility to adjust resonant frequencies by varying the number of beams, the shape of the stepped section, and the proof mass of individual beams. Thus, it has the potential to generate sufficient power output from wideband, low frequency, and low amplitude vibration sources and can be easily optimized for a specific application.

Design and Modeling of A Flexible Longitudinal Zigzag Structure for Enhanced Vibration Energy Harvesting

Analytical and Experimental Investigation of Flexible Longitudinal Zigzag Structures for Enhanced Multi-Directional Energy Harvesting

A Broadband Zigzag-Shaped Energy Harvester for Both Wind Energy and Vibration Energy: Modeling and Experimental Verification

Harvesting Weak Vibration Energy by Integrating Piezoelectric Inverted Beam and Pendulum

Modeling and Experiment of a V-Shaped Piezoelectric Energy Harvester

Promote Performance of Vibration Energy Harvesting by Amplified Inertial Force and Clamped Piezoelectric Beams

Vibration Analysis and Distributed Piezoelectric Energy Harvester Design for the L-shaped Beam

Curved Flexoelectric and Piezoelectric Micro-Beams for Nonlinear Vibration Analysis of Energy Harvesting

An L-shaped and Bending-Torsion Coupled Beam for Self-Adaptive Vibration Energy Harvesting

Design and dynamic analysis of integrated architecture for vibration energy harvesting including piezoelectric frame and mechanical amplifier

Nonlinear Piezoelectric Structure for Ultralow-frequency Band Vibration Energy Harvesting with Magnetic Interaction

Design and experimentation of width tapered meandered array structure for low frequency broadband vibration energy harvesting

Design and experimentation of meandered low frequency broadband piezoelectric energy harvester with resonant tuning

Design and Analysis of a Low-Frequency Vibration Energy Harvester with a Piezoelectric Stack and a Negative Stiffness Structure

Theoretical Modeling and Nonlinear Analysis of Piezoelectric Energy Harvesting from Vortex-Induced Vibrations

A MEMS Piezoelectric Cantilever Beam Array for Vibration Energy Harvesting

Harvesting vibration energy through a cantilever beam with enhanced harvesting capability

Modelling and analysis of a novel E-shape piezoelectric vibration energy harvester with dynamic magnifier

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilevered in Piezoelectric Vibration Energy Harvester

Multimodal Design Of A Novel Mems Structure For Piezoelectric Energy Harvester

Theoretical and Experimental Investigations of Multibifurcated Piezoelectric Energy Harvesters with Coupled Bending and Torsional Vibrations