Abstract:International Journal of Structural Stability and Dynamics, Ahead of Print. During the last years, the design and production of self-powered engineering structures gained extensive attention due to the shortage of nonrenewable energy resources and the increase in fossil fuel prices. To this end, the current numerical study focused on assessing the forced vibration behavior and energy harvesting capability of a silicon microbeam reinforced with chopped fiber rods (CFRs). This topic is important because it offers a novel approach to generate sustainable energy from ambient vibrations, addressing the growing demand for renewable energy sources while advancing structural health monitoring and smart materials technology. The piezoelectric patch is located at the top surface of the microbeam and is under the distributed harmonic force. The related governed relations are derived using the new theory of the five-parameter beam model, which also accounted for the Poisson effect, and solved by adopting the Galerkin method. The microscale effects are taken into account by employing strain gradient theory. Moreover, the effects of the top and bottom surfaces have accounted for the microbeam using Gurtin and Murdoch's theory. The outcomes of this research indicated that utilizing narrow-short length piezoelectric patches for Silicon microbeams yields the highest available output voltage. Compared to the homogeneous porosity distribution case, as the porosity coefficient reduced in the bottom and top surfaces of the microbeam, the voltage initial rise point decreased by about 13%. By increasing the porosity coefficient to 0.9, both voltage and displacement initial rise points are increased respectively by approximately 32% and 890%. As the piezoelectric patch thickness is decreased from 8[math][math]m to 6[math][math]m while the strain gradient theory is utilized, voltage and displacement initial rise points are increased respectively about 1066.67% and 1[math]200%. Also, a simultaneous increase in CFRs vol. fraction from 5% to 10% and Silicon microbeam thickness from 7[math][math]m to 8[math][math]m caused about 37% improvement in dynamic deflections.

Energy Harvesting Estimation from Vibration of Chopped Fiber Rod-Reinforced Microbeams with Piezoelectric Patch Based on Five Parameter-Surface-Strain Gradient Beam Model

Optimal Locations of Piezoelectric Patch on Wideband Random Point-Driven Beam for Energy Harvesting

Experimental and numerical implementation of auxetic substrate for enhancing voltage of piezoelectric sandwich beam harvester

Energy Harvesting By Dynamic Unstability And Internal Resonance For Piezoelectric Beam

Curved Flexoelectric and Piezoelectric Micro-Beams for Nonlinear Vibration Analysis of Energy Harvesting

Experimental and analytical parametric study of single-crystal unimorph beams for vibration energy harvesting

Vibration of multilayer cantilever beams towards piezoelectric power harvesters

Design and Modeling of A Flexible Longitudinal Zigzag Structure for Enhanced Vibration Energy Harvesting

Modeling and analysis of a macro-fiber piezoelectric bimorph energy harvester operating in d33-Mode using Timoshenko theory

Experiment and Validated Model for Vibration-Based Energy Conversion of a Horizontal Cantilever Beam from a Laminated Piezoelectric Composite Patch

Optimized Energy Harvesting Through Piezoelectric Functionally Graded Cantilever Beams

Analytical Modelling and Optimization of a Piezoelectric Cantilever Energy Harvester with In-Span Attachment

Energy harvesting from vibrations of a beam under moving mass using auxetic cantilever beams: Theoretical and experimental investigations

Design analysis and simulation of serpentine-shaped piezoelectric cantilever beam for pipeline vibration-based energy harvester

Harvesting vibration energy through a cantilever beam with enhanced harvesting capability

Energy harvesting from coupled bending-twisting oscillations in carbon-fibre reinforced polymer laminates

On the size-dependent electromechanical layered beam-type porous functionally graded flexoelectric energy harvesters

Vibration Analysis and Distributed Piezoelectric Energy Harvester Design for the L-shaped Beam

Vibration Energy Harvesting in an FG-CNTRC Circular Microplate with a Surface-Bonded Piezoelectric Layer

Harvesting vibration energy using piezoelectric material: Modeling, simulation and experimental verifications

Design and dynamic analysis of integrated architecture for vibration energy harvesting including piezoelectric frame and mechanical amplifier