Abstract:Pulsed power systems can deliver high peak power in a micro/nano-second timescale to various loads in scientific and industrial applications, whose performances are significantly influenced by the pulsed discharge switch. This article presents the development and comprehensive tests of a miniaturized sealed-off pseudospark switch. The structure of double-gap and multi-channel is adopted to achieve the high hold-off voltage and high current capacity. In single pulse tests, the influence of pressure in the switch is analyzed. As the pressure increases, values of multiple parameters decrease, like self-breakdown voltage, trigger delay, and voltage dropping time. In a wide pressure range, trigger jitter is below 3 ns, and the minimum is <1 ns. At low pressure, the transient voltage across two gaps becomes inconsistent, and two types of current quenching are observed, which are related to processes occurring on cathode surface. In repetitive pulse tests, the direct repetitive operation is up to 3.5 kHz while higher repetition rate is limited by the trigger system. In double-pulse tests, the maximum repetition rate can be higher than 8 kHz for 40 kV pulsed voltage. Meanwhile, the insulation recovery speed is higher at lower pressure, and as the time delay between two pulses increases, the second pulse breakdown voltage increases nonlinearly. In high current tests, the switch is also used in metal wire explosion experiments and operates at the condition of 30 kV/40 kA for more than 104 shots without performance degradation. Further lifetime tests point out that the switch can work for >106 shots stably at moderate current. Experiments prove that the designed switch has superior performances including high hold-off voltage (>50 kV), low jitter (<1 ns), high repetition rate (>3.5 kHz), high peak current (>40 kA), long lifetime (>106 shots) and miniaturized size.

Electrical and optical studies of a pseudo-spark switch

Design and Performance Analysis of Multi-gap Multi-channel Spark Switch with LCR Triggered Method

Multiple-Gap Spark Gap Switch

Long Lifetime, Triggered, Spark-Gap Switch For Repetitive Pulsed Power Applications

Schlieren techniques for observations of long positive sparks: Review and application

The effect of intermediate electrode on pseudo-spark switch performance with high repetition rate

Spark Discharge: Application Multielement Spectrochemical Analysis

High repetition rate, fast current rise, pseudo-spark switch

Experimental Research of ZnO Surface Flashover Trigger Device of Pseudo-Spark Switch

Fast breakdown process and characteristics diagnosis of nanosecond pin-pin discharge

Comparison of Electrode Effects in High-Pressure and Low-Pressure Gas Discharges Like Spark-Gap and Pseudo-Spark Switch

Formation of diffuse and spark discharges between two needle electrodes with the scattering of particles

Optical and spectral techniques for studying high-voltage laser-triggered switch

Optical Diagnosis of Preionization Mechanisms and Breakdown Characteristics in a Nanosecond Switch

Comparative Study of Pulsed Breakdown Processes and Mechanisms in Self-Triggered Four-Electrode Pre-Ionized Switches

A Miniaturized Sealed-Off Double-Gap Pseudospark Switch for High Power and High Repetition Rate Pulsed Discharge Applications

Electric characteristics of pseudo-spark during breakdown phase

Preliminary Experiments on Gaseous Recovery in Gas Spark Gap Switches

Closing mechanism of electrically-triggered vacuum surface flashover switch

Retraction Notice Phenomenon of Skipping Sparks in Discharges on a Dielectric Surface

Characteristic Study on Pseudospark Pulsed Electron Beam Transfer