Abstract:We comprehensively evaluated optical characteristics, environmental stabilities, fiber optics compatibilities, and high-speed performances of multimode polymer waveguides fabricated in small batch with a length of 946 mm. The waveguides exhibit a low transmission loss (0.046 dB/cm at a wavelength of 850 nm), low interchannel crosstalk (<= -58 dB), and a large misalignment tolerance (+/- 20 mu m) between fiber and waveguide. The waveguides show good environmental stability and the increase of propagation loss is as small as 0.005 dB/cm and 0.004 dB/cm after a 1000-h ageing test and five solder reflow cycles, respectively. The waveguides have good compatibilities w ith fibers having different core diameters and index profiles that may be encountered in the real application environment. High-speed transmission performances were evaluated using both nonreturn to zero (NRZ) transmission at data rates of 25 Gb/s and 30 Gb/s, and PAM4 transmission at data rates of 20 Gb/s and 56 Gb/s, respectively. There is no obvious degradation on the eye diagram due to the insertion of the waveguide. Error free transmission were successfully obtained for NRZ transmission at data rates of both 25 Gb/s and 30 Gb/s. The BER for PAM4 transmission reached a level of 10(-4) at data rates of both 10 Gbaud (20 Gb/s) and 28 Gbaud (56 Gb/s), which is well below the forward error correction limitation. Moreover, it is the bandwidth of the test equipment rather than the polymer waveguide itself that limits the high-speed transmission performances in our experiments. The results demonstrate that the polymer waveguides are good candidates for high-speed and meter-scale on-board optical interconnect applications.

High-bandwidth, high-numerical aperture graded-index polymer optical fiber

Proposed Square Lattice Photonic Crystal Fiber for Extremely High Nonlinearity, Birefringence and Ultra-High Negative Dispersion Compensation

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

High-Bandwidth and Large Coupling Tolerance Graded-Index Multimode Polymer Waveguides for On-board High-Speed Optical Interconnects

Circular-core Single-Mode Polymer Waveguide for High-Density and High-Speed Optical Interconnects Application at 1550 Nm

Design of single-moded holey fibers with large-mode-area and low bending losses: the significance of the ring-core region

High-efficiency Apodized-Imaging Chip-Fiber Grating Coupler for Silicon Nitride Waveguides

The future of plastic optical fiber

Standard Single-Mode Fiber with High Modal Bandwidth As Two-Mode Fiber Around 1060 Nm for High Data Rate Transmission

Directly Inscribed Multimode Polymer Waveguide and 3D Device for High-Speed and High-Density Optical Interconnects

Graded Index Microstructured Polymer Optical Fibers for Terahertz Applications

Novel design of broadband dispersion compensating photonic crystal fiber with all solid structure and low index difference

Wideband multimode fiber with an optimized core size and fluorine-doped cladding for high-speed SWDM and CWDM transmission.

High Bandwidth Performance of Multimode Graded-Index Microstructured Polymer Optical Fibers

Practical Evaluation of Polymer Waveguides for High-Speed and Meter-Scale On-Board Optical Interconnects

Fused silica optical fibers with graded index nanostructured core

High-Speed Performance of 140 cm-long Flexible Multimode Polymer Waveguides Link Supporting 1 mm-radius Bend

Design of photonic band gap fibers with suppressed higher-order modes: towards the development of effectively single mode large hollow-core fiber platforms

An optimized configuration of large mode field area PMMA photonic crystal fiber with low bending loss: a new approach

Design and Analysis of a Large Mode Field Area and Low Bending Loss Multi-Cladding Fiber with Comb-Index Core and Gradient-Refractive Index Ring

Single-mode polymer waveguide with circular core operating at 1550 nm for high-density and highspeed optical interconnect applications