Abstract:In this work, a novel infinity 3D printing technique is explored to fabricate continuous multi-meter-long low-loss near-zero dispersion suspended-core polypropylene fibers for application in terahertz (THz) communications. Particular attention is paid to process parameter optimization for 3D printing with low-loss polypropylene plastic. Three microstructured THz fibers were 3D printed using the standard and infinity 3D printers, and an in-depth theoretical and experimental comparison between the fibers were carried out. Transmission losses (by power) of 4.79 dB/m, 17.34 dB/m and 11.13 dB/m are experimentally demonstrated for the three fibers operating at 128 GHz. Signal transmission with BER far below the forward error correction limit (10-3) for the corresponding three fiber types of lengths of 2 m, 0.75 m and 1.6 m are observed, and an error-free transmission is realized at the bit rates up to 5.2 Gbps. THz imaging of the fiber near-field is used to visualize modal distributions and study optimal fiber excitation conditions. The ability of shielding the fundamental mode from the environment, mechanical robustness and ease of handling of thus developed effectively single-mode high optical performance fibers make them excellent candidates for upcoming fiber-assisted THz communications. Additionally, novel fused deposition modeling (FDM)-based infinity printing technique allows continuous fabrication of unlimited in length fibers of complex transverse geometries using advanced thermoplastic composites, which, in our opinion, is poised to become a key fabrication technique for advanced terahertz fiber manufacturing.

Graded Index Microstructured Polymer Optical Fibers for Terahertz Applications

Rectangular Porous-Core Photonic-Crystal Fiber With Ultra-Low Flattened Dispersion and High Birefringence for Terahertz Transmission

Theoretical and Experimental Study on Polymer Microstructured Fibers

Terahertz Circular Photonic Crystal Fiber

Suspended core subwavelength fibers: practical designs for the low-loss terahertz guidance

Terahertz birefringent gratings for filtering and dispersion compensation

Design and optimization of dispersion-flattened microarray-core fiber with ultralow loss for terahertz transmission

Microstructured fiber links for THz communications and their fabrication using infinity printing

Low-loss Air-Core Polarization Maintaining Terahertz Fiber

Single-Polarization Single-Mode Photonic Crystal Fiber for Terahertz Applications

Low-loss Polarization-Maintaining Terahertz Fiber Based on Central Air Hole Movements

Design and Numerical Analysis of A Thz Square Porous-Core Photonic Crystal Fiber for Low Flattened Dispersion, Ultrahigh Birefringence

Chalcogenide glass-based Low Loss Graded Index Photonic Crystal Fiber for non-linear applications in the Mid-IR regime

High refractive index composite materials for THz waveguides: trade-off between index contrast and absorption loss

Polymer Fiber and Its Application

Polarization maintaining air-core bandgap terahertz fiber

Highly Birefringent Photonic Crystal Fibers with Near-zero Flattened Dispersion for Polarization-Maintaining Terahertz Transmission

Terahertz Sensor via Ultralow-Loss Dispersion-Flattened Polymer Optical Fiber: Design and Analysis

Low-loss Polarization-Maintaining THz Photonic Crystal Fiber with a Triple-Hole Core.

Periodic Micro-Structures in Optical Microfibers Induced by Plateau-Rayleigh Instability and Its Applications.

Fabrication and spectral characterization of the porous dielectric THz waveguides using microstructured molding technique