Abstract:Frequency selective surface (FSS) has extensively been investigated over the past decades. The most famous applications of FSS are used for antennas radome and controlling radar cross section (RCS). FSS radome could reflect the signal out of the band so that the RCS could be reduced by shaping. However, with the development of radar detection technology, the scattering out of the band becomes non-negligible. In order to improve the problem, the FSS rasorber was proposed. It is the combination of the absorber and the radome. In this paper, a wideband transmission FSS rasorber is designed, acting as a stealthy radome to reduce the scattering out of band of the antenna system. The rasorber consists of an absorption layer (LayerA) and a transmission layer (LayerT). The LayerA, which use a resistor-loaded in Jerusalem cross element with non-touching centre, provides stable losses out of band and minimizes losses in the band. The LayerT use as the ground plane of an absorber based on the absorption layer within the total reflection band and providing a transmission window in the band. In order to obtain a wideband transmission, two series chokes are inserted in each leg in the LayerA and the LayerT adopts a second-order resonator. Moreover, the elements are packed densely owing to a skewed grid in the LayerA and the miniaturized non-resonant element in the LayerT. Superdense arrays cause a more stable performance of the rasorber, especially the delay of grating lobes onset. The composite structure is thoroughly analyzed by means of the full-wave numerical simulation. The simulation shows that the -1 dB transmission window is 5.7 ~ 6.7 GHz, and the -10dB reflection band is 2.2 ~ 5.1 GHz. The design would be widely used in broadband antenna system.

FDTD analysis of resistor-loaded bow-tie antennas covered with ferrite-coated conducting cavity for subsurface radar

Design and Calculation of Electromagnetic Characteristics of Structure Absorbent Materials

The Making and Application Effect Analysis of One Facility Ground Penetrating Radar Antenna

The efficient prediction technique of SAR based on a modified FDTD method

Design of a Tunable Low-Frequency and Broadband Radar Absorber Based on Active Frequency Selective Surface

Development of a Novel FDTD (2, 4)-Compatible Conformal Scheme for Electromagnetic Computations of Complex Curved PEC Objects

FDTD modeling of 3D metal-LTCC structures for RF(MM)ICs

The Conformal Finite-Difference Time-Domain Analysis of the Antipodal Vivaldi Antenna for UWB Applications

Design of a Wideband Absorption Frequency Selective Rasorber Based on Double Lossy Layers

A Wideband Transmission Frequency Selective Surface Rasorber

Frequency Selective Rasorber with Broadband Transmission Window Using Characteristic Modes Analysis

Ultrabroadband Double-Sided and Dual-Tuned Active Absorber for UHF Band

Realization of Thin and Broadband Magnetic Radar Absorption Materials with the Help of Resistor FSS

Design and investigation of cavity backed bowtie antenna with unidirectional radiation pattern using characteristic mode analysis

A Thin and Broadband Tunable Radar Absorber Using Active Frequency Selective Surface

Optimal design of electromagnetic absorbers using visualization method for wideband potential applications

Rigorous Analysis and Design of Resistor-Loaded Patch Antennas with Flexible Gain for Indoor Radar Sensors

Radiation characteristics of cavity backed aperture antennas in finite ground plane using the hybrid FEM/MoM technique and geometrical theory of diffraction

A Frequency Reconfigurable Antireflection Metasurface for GPR

Experimental Investigations on Enhanced GPR Detection Assisted by Broadband Metasurfaces

Detection of near-field, low permittivity layers with ground penetrating radar: Analytical estimation of the reflection coefficient