Abstract:The lateral bearing performance of a defective pile-supported wharf located on a slope was investigated through centrifuge modeling, and a numerical model was employed to back-analyze the centrifuge test data. The pile foundation system was composed of double-plumb, single-plumb, and batter piles, and the defects were located at the front row of the double-plumb piles. The failure mode, bearing lateral load, bent displacement, and pile bending moments were examined. The results show that overturning with slight torsion occurred in the bent under the lateral load. The piles clearly deformed around defects and were separated from the soil on the landside. The lateral bent displacement increased rapidly after a threshold lateral load value was reached. The bending moments were generally positive (i.e., the side facing the water was in tension) in the upper parts and negative in the lower parts of the double-plumb piles. The bending moments of the double-plumb pile heads increased with the lateral load, whereas the bending moments directly underneath the slope surface exhibited decreasing-constant tendencies with increasing lateral load. The bending moment of the single-plumb pile was generally positive above the slope surface and in compression below the slope surface, and decreasing-constant tendencies were observed with increasing lateral load just below the slope surface. The bending moment of the forward batter pile was negative and decreased with the lateral load around the slope surface and in the middle of the soil. The bending moment of the backward batter pile was generally positive above the slope surface, negative below the slope surface, and remained almost constant around the soil.

Research on overall bearing characteristics of high-piled wharf under horizontal load

Lateral Bearing Performance of a Defective Pile-Supported Wharf with Batter Piles

An Improved Model for the Horizontal Dynamic Response of Piles in Saturated Soil

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

STUDY ON VERTICAL BEARING CAPACITY OF LARGE-DIAMETER CAST-IN-SITU THIN-WALL TUBULAR PILE

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Studies on Bearing Characteristic of Open-Ended and Close-Ended Pipe Piles under High-Speed Railway Loadings

Experimental Investigation and Damage Identification of High-Pile Wharf Framed Bents under Horizontal Impact Loads

INFLUENCE OF ANCHORAGE DEPTH ON MECHANICAL BEHAVIOUR OF DOUBLE-ROW ANTI-SLIDE PILES

Influence Of Excavation Unloading On Vertical Bearing Behavior Of Existing Pile Groups

Analysis of Q-S Curve on Negative Frictional Pile under Large-Scale Vertical Loads

Analysis of stress and failure mechanism on composite foundation improved by rigid piles under flexible foundation considering damage of piles

Bearing capacity and deflection behaviors of large diameter monopile foundations in sand seabed

Behavior of Underground Structures under Large Area Loading

Nonlinear analysis of horizontal bearing capacity of large-diameter rigid piles based on double conical strain wedge model

Seismic Response Analysis of the High-Pile Wharf Based on the Interaction of Piles and Soil

Analysis of factors causing damages to oblique bearing piles of wharf

Model test study on horizontal bearing behavior of pile under existing vertical load

Study of Deformation Performance and Seismic Damage on Pile-Supported Wharf by Shaking Table Test