Abstract:Large-diameter monopiles are the most commonly used foundation to support offshore wind turbines. Early designs usually adopted pile diameters (D) between 4 and 6 m, which is recently extended to 8 m and will target 10 m in the future. It is increasingly evident that the existing design method (i.e., API's p-y model) can significantly under-predict the lateral stiffness and capacity of large-diameter monopiles in soft clay, due to ignoring the soil resistances from base shear and base moment which become more pronounces as L/D reduces. In this study, a two-spring approach is proposed, aiming to predict the lateral behaviour of monopiles with varied L/D ratios in a unified manner. In light of the soil flow mechanisms around monopiles, the pure lateral soil resistance above the rotation point (RP) is quantified using a p-y model, while the resistances below the RP including the base shear and base moment are integrated into a moment-rotation spring (characterized by a M-R-theta(R) model) at the RP. It can naturally recover to a p-y model while analyzing flexible piles, where theta(R) = 0 at RP. Formulations of the 'p-y + M-R-theta(R)' model (including diameter-related p-y and M-R-theta(R) models, and the depth of the RP) are proposed based on the results of a series of well-calibrated 3D numerical models. The proposed model has satisfactorily reproduced a number of field and centrifuge test results on laterally loaded monopiles with a wide range of L/D ratios (including flexible, semi-rigid and rigid piles), using a unified set of parameters. Compared to the standard p-y model, the adoption of the proposed 'p-y + M-R-theta(R)' model is shown to substantially reduce design conservatism.

Nonlinear analysis of horizontal bearing capacity of large-diameter rigid piles based on double conical strain wedge model

Centrifuge Modelling of Lateral Loading Behaviour of a “Semi-Rigid” Mono-pile in Soft Clay

Lateral Cyclic Pile–soil Interaction Studies on a Rigid Model Monopile

Centrifuge Modelling for Seismic Response of Single Pile for Wind Turbine Subjected to Lateral Load

Model tests on characteristics of ocean and offshore elevated piles with large lateral deflection

Timoshenko Beam Theory–based Analytical Solution of Laterally Loaded Large-Diameter Monopiles

A Numerical Study on the Lateral Loading Behaviour of Offshore Tetrapod Piled Jacket Foundations in Clay

Research on the laterally loaded piles under huge moment based on Lagrange multipliers method

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Field Trials on Monotonic Behaviour of a Driven Pile at an Offshore Wind Farm in China

Analysis Approach of Piled Jacket Foundation in Sand for Offshore Wind Turbines Subjected to Lateral Loads

Lateral Response Analysis of a Large‐Diameter Pile Under Combined Horizontal Dynamic and Axial Static Loads in Nonhomogeneous Soil

Field and Numerical Study of the Lateral Response of Rigid Piles in Sand

Dynamic Response of Offshore Open-Ended Pile under Lateral Cyclic Loadings

Influence of Pile Diameter and Aspect Ratio on the Lateral Response of Monopiles in Sand with Different Relative Densities

Bearing capacity and deflection behaviors of large diameter monopile foundations in sand seabed

Nonlinear analysis of laterally loaded single pile in layered soil based on conical strain wedge model

Analysis method for pile groups subjected to lateral and torsional loads

A Unified Lateral Soil Reaction Model for Monopiles in Soft Clay Considering Various Length-to-diameter (L/D) Ratios

Lateral Deformation Prediction Model of Pile Foundation in Liquefiable Site

Lateral Dynamic Responses of Coastal Group Piles Considering Pile‒water‒soil Interactions