Abstract:Due to energy shortage and environmental pollution, vehicles and aircraft powered by Li-ion batteries have now received widespread attention. Among various types of battery thermal management systems (BTMSs), the air-cooled BTMS is still the preferred choice due to its affordability, longevity, and simplicity. To ensure the reliable operation of electric vehicles and aircraft at different altitudes, it is extremely meaningful and significant to study the thermal behavior of batteries at different altitudes. Therefore, for the investigation of altitude impact, this paper firstly proposes an indirect decoupling method to address the limitations of using ambient temperature as a single variable. Based on this, several different configurations of air-cooled BTMS have been investigated through numerical simulation. Then, for the tapering-type BTMS with the best thermal performance, the battery behavior at different altitudes is investigated and the influence law of sheer altitude factor is summarized. Subsequently, to address the thermal performance issues at higher altitudes, this research proposes three optimization measures, which include increasing inlet velocity, decreasing inlet temperature, and incorporating phase change material (PCM) layers, respectively. Ultimately, the entropy weight-TOPSIS method is adopted to seek the optimal measure at different parameters. The results indicate that as altitude increases from the standard altitude to 4000 m, the maximum temperature rises significantly, exceeding the permissible temperature range of Li-ion batteries. Besides, in order to effectively confine the maximum temperature within the permissible temperature range at an altitude of 4000 m, the inlet velocity should be increased by at least 2 m/s or the inlet temperature should be reduced by at least 3 °C. Among all optimized solutions, the solution with the addition of 0.4 mm PCM layers is the best based on the comprehensive evaluation of multiple indicators.

Influence of High Altitude Environment on Electrical Performance of Miniature Circuit Breaker

Influence of High Altitude Environment on Thermal Performance of Miniature Circuit Breaker

Influence of Front Time on Long-Airgap Breakdown Voltage in High-Altitude Areas

Influence of Temperature and Air Pressure on Arc Characteristics of Horizontal Air Insulated Disconnector

Simulation Researches on Influence Factors of Temperature Rise in High Voltage Vacuum Circuit Breaker

Numerical Simulation on Pressure Field in Chamber of Low-Voltage Circuit Breaker in Different Conditions

Influence of different factors on gap breakdown process with hot electrode and high temperature gas medium in low voltage circuit breaker chamber based on particle-in-cell/Monte-Carlo collision simulation

Influence of Mechanical Faults on Electrical Resistance in High Voltage Circuit Breaker

Simulation Study On The Control Valve In Hydraulic Operating Mechanism Of The High Voltage Circuit Breaker

Dynamic simulation of transient electric shock process in humans under high altitude UHVDC transmission lines

Study on the Insulation Performance of SF6 Gas Under Different Environmental Factors

Analysis of Influence Factors on AC Breakdown Characteristics of Rod-Barrier Gap and Electric Field Simulation

Discharge Performance of Different Models at Low Pressure Air

Thermal Analysis of High Voltage Circuit Breaker Based on Thermal Network

Lighting impulse discharge characteristic of composite insulator developed for applying in 3500m altitude

Numerical study on air-cooled battery thermal management system considering the sheer altitude effect

Effect of grounded shield on electric field distribution for solid insulation vacuum circuit breaker

FEM Simulation of the Interruption of Low Voltage Circuit Breaker

Electric Field Evaluation of &#x00b1;400kv Converter Quadrivalve Corona Shields in High Altitude Area

Heat Transfer in a High-Voltage Vacuum Circuit Breaker

Effect of Cosmic Rays on the Failure Rate of Flexible Direct Current Converter Valves in High-Altitude Environment