Abstract:The preferred orientation of crystalline films in hybrid perovskite materials is known to influence the performance of perovskite solar cells (PSCs). Although the preferred growth along the (112) directions has been reported to promote charge transport within the Pb-based polycrystalline perovskite films, the preferred orientation growth of this facet is still difficult to be achieved due to the higher formation energy compared with the (110) plane. Herein, Sn–Pb binary perovskite films with a well-controlled orientation along the (224) plane were achieved by introducing a simple ultrasonic treatment (UST) into the additive engineering fabricated method. UST is used to process the perovskite precursor solutions of tartaric acid (TA) modified Sn–Pb binary polycrystalline perovskite films to regulate the interactions between PbI2/SnI2 and TA in the intermediate phases. Meanwhile, TA-modulated MA0.9Cs0.1Pb0.75Sn0.25I3-based perovskite films with a preferred orientation of (224) crystal plane were obtained by precisely controlling the UST time to 15 min. The highest power conversion efficiency (PCE) of 15.59% with less hysteresis and improved stability was achieved, while realizing 8.64 and 25.32% enhancements of PCE compared with that of TA-based and control counterparts with (110) preferred orientation, respectively. Our work provides a promising route to obtain preferred orientation growth of polycrystalline perovskite films. In particular, we have shown that this approach improves the performance of Sn–Pb binary PSCs, while such methodology is quite flexible and could also be applied to other low-/non-toxic PSCs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c19014?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c19014</a>.More details on the characterization of experimental results, optical transmittance spectra, photographs of perovskite precursor solutions, AFM images, SEM images, photographs of perovskite films, images of solution states, UV–vis absorption spectra, FTIR spectra, XRD patterns, statistical distribution of device performance, stability test, radially integrated azimuth intensity plots, HRTEM images, XPS and HRXPS spectra, Tauc curves, histogram of PCE distributions, water contract angles, and long-term stability measurements (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c19014/suppl_file/am0c19014_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Perovskite Solar Cells on Sn-Doped In2o3 Electrodes with Artificially Controlled (222) Preferred Orientation

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Preferred Film Orientation to Achieve Stable and Efficient Sn–Pb Binary Perovskite Solar Cells

Controlled Orientation of Perovskite Films Through Mixed Cations Toward High Performance Perovskite Solar Cells

Enhancing Electron Extraction and Transport in Inorganic Perovskite Solar Cells Via Additional Built-in Potential of SnO2-BiFeO3 Nano-Heterostructure

Surface-Orientation Elimination of Vapor-Deposited PbI 2 Flakes for Efficient Perovskite Synthesis on Curved Solar Cells

Vacuum-assisted reforming cathode interlayer orientation for efficient and stable perovskite solar cells

Sn Composition Engineering Toward the Breakthrough of Transparent Front Electrodes for Efficient and Stable Perovskite Solar Cells

Bifunctional Ligand-Induced Preferred Crystal Orientation Enables Highly Efficient Perovskite Solar Cells

Dimensionality Control of SnO2 Films for Hysteresis-Free, All-Inorganic CsPbBr3 Perovskite Solar Cells with Efficiency Exceeding 10

Fullerene‐Free p–i–n Perovskite Solar Cells: Direct Deposition of Tin Oxide on Perovskite Layer Using Ligand Bridges

Low-Temperature-Processed Monolayer Inverse Opal SnO2 Scaffold for Efficient Perovskite Solar Cells

Naphthalene Diimide-Modified SnO2 Enabling Low-Temperature Processing for Efficient ITO-Free Flexible Perovskite Solar Cells

Two-Dimensional Cs3Sb2I9−xClx Film with (201) Preferred Orientation for Efficient Perovskite Solar Cells

Realizing Stable Perovskite Solar Cells with Efficiency Exceeding 25.6% Through Crystallization Kinetics and Spatial Orientation Regulation

Orientation Manipulation and Defect Passivation for Perovskite Solar Cells by a Natural Compound

Tin‐Lead Perovskite Solar Cells with Preferred Crystal Orientation by Buried Interface Approach

Managing Interfacial Defects and Charge-Carriers Dynamics by a Cesium-Doped SnO2 for Air Stable Perovskite Solar Cells

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

SnO2-Based Perovskite Solar Cells: Configuration Design and Performance Improvement

A low-temperature TiO2/SnO2 electron transport layer for high-performance planar perovskite solar cells