Abstract:A multifunctional molecular bridging layer using 2,5‐dichloroterephthalic acid as a pre‐buried additive on the tin oxide (SnO2) electron transport layer enables interfacial energy level alignment and defect passivation. As a result of the method, the high power conversion efficiencies of 23.25% and 20.23% for the active area of 0.15 cm2 device and 17.52 cm2 mini‐module are achieved, respectively. Tin oxide (SnO2) is currently the dominating electron transport material (ETL) used in state‐of‐the‐art perovskite solar cells (PSCs). However, there are amounts of defects distributed at the interface between ETL and perovskite to deteriorate PSC performance. Herein, a molecule bridging layer is built by incorporating 2,5‐dichloroterephthalic acid (DCTPA) into the interface between the SnO2 and perovskites to achieve better energy level alignment and superior interfacial contact. The multifunctional molecular bridging layer not only can passivate the trap states of Sn dangling bonds and oxygen vacancies resulting in improved conductivity and the electron extraction of SnO2 but also can regulate the perovskite crystal growth and reduce defect‐assisted nonradiative recombination due to its strong interaction with undercoordinated lead ions. As a result, the DCTPA‐modified PSCs achieve champion power conversion efficiencies (PCEs) of 23.25% and 20.23% for an active area of 0.15 cm2 device and 17.52 cm2 mini‐module, respectively. Moreover, the perovskite films and PSCs based on DCTPA modification show excellent long‐term stability. The unencapsulated target device can maintain over 90% of the initial PCE after 1000 h under ambient air. This strategy guides design methods of molecule bridging layer at the interface between SnO2 and perovskite to improve the performance of PSCs .

Orientation Manipulation and Defect Passivation for Perovskite Solar Cells by a Natural Compound

Interfacial Energy Level Alignment and Defect Passivation by Using a Multifunctional Molecular for Efficient and Stable Perovskite Solar Cells

Aromatic carboxyl acid regulated nanoparticle deposition and passivation of tin oxide for high performance perovskite solar cells

Defect Passivation by Natural Piperine Molecule Enabling for Stable Perovskite Solar Cells with Efficiencies over 23%

Multifunctional Regulation of Highly Orientated Tin–Lead Alloyed Perovskite Solar Cells

Realizing Stable Perovskite Solar Cells with Efficiency Exceeding 25.6% Through Crystallization Kinetics and Spatial Orientation Regulation

Bifunctional Ligand-Induced Preferred Crystal Orientation Enables Highly Efficient Perovskite Solar Cells

Synergistic Modulation of Sn2+ Oxidation and Perovskite Crystallization Induced by 4-Hydroxypyridine for Stable Lead-Free Solar Cells

Silane Doping for Efficient Flexible Perovskite Solar Cells with Improved Defect Passivation and Device Stability

Tuning Perovskite Surface Polarity via Dipole Moment Engineering for Efficient Hole-Transport-Layer-Free Sn-Pb Mixed-Perovskite Solar Cells

Synergistical Transition Metal Ion Co-Doping and Multiple Functional Additive Passivation for Realizing 25.30% Efficiency Perovskite Solar Cells

Electronically Manipulated Molecular Strategy Enabling Highly Efficient Tin Perovskite Photovoltaics

Modification of SnO2 by Acidic FAAc-HI Solution for Efficient and Stable Perovskite Solar Cells with a Multifunctional Interface

Aqueous solvent-regulated crystallization and interfacial modification in perovskite solar cells with enhanced stability and performance

Interface and Bulk Engineering by Dual Sulfonates Toward High Efficiency Perovskite Solar Cells with Better Reproducibility and Stability

Modulating Chemical Interaction to Realize Bottom‐Up Defect Passivation for Efficient and Stable Perovskite Solar Cells

Facilitating Electron Transport in Perovskite Solar Cells through Tailored SnO2 Film Composition

A Synergistic Effect among Multiple Functional Groups of 4‐PyAO Additive for Performance Enhancement of Tin‐Based Perovskite Solar Cells

Custom-tailored hole transport layer using oxalic acid for high-quality tin-lead perovskites and efficient all-perovskite tandems

Over 14% efficiency of highly reproducible Sn perovskite solar cell via defect passivation and morphology repairment

Tri‐Brominated Perovskite Film Management and Multiple‐Ionic Defect Passivation for Highly Efficient and Stable Solar Cells