Abstract:The cable-stayed bridge with steel-concrete hybrid girders is one of the most widely used bridge types in China. As the key sub-structure of this kind of bridge, the hybrid zone - which consists of girders in the region jointing the steel girder and the concrete girder - plays an important role in securing the safety and good serviceability of the entire bridge. Consequently, the study on the mechanical behavior of the hybrid zone is essential for both the analysis and design of the whole bridge. However, due to the strong dependence of the Saint-Venant Principle and significant influence of the Fuzzy Region which cannot be quantitatively determined, the traditional local-elaborate modeling method for the study is limited by its dim Saint-Venant Region-Fuzzy Region boundary, leading to unreliable analysis results and enormous trial and error works. To tackle this problem, the multi-scale modeling method is introduced in this paper, employing the flexible boundary conditions (flexible BCs) for the simulation of the complex boundary condition of the hybrid zone. The fourth dimension is time. In order to gain results closer to the realistic behavior of the bridge at the finished date, it is considered to model the construction process. A 4D multi-scale model of the hybrid zone is then established according to the prototype of an actual cable-stayed bridge project in Chongqing, China. Simultaneously, a local-elaborate model is built for comparison. Comparison study of the finite element models demonstrates that analysis results of the 4D multi-scale model are reliable without the influence of the Fuzzy Region. The model is more accurate, reliable and, hence, widely applicable. It is concluded that the 4D multi-scale modeling method may offer a new approach for the analysis and monitor of the hybrid zone for cable-stayed bridges with steel-concrete hybrid girders in the future.

Decentralized control design for a cable-stayed bridge benchmark

Overlapping reliable control for a cable-stayed bridge benchmark

Applications of Some Semiactive Control Systems to Benchmark Cable-Stayed Bridge

Phase I Benchmark Control Problem for Seismic Response of Cable-Stayed Bridges

Decentralized Model Predictive Control of Nonlinear Continuous Systems with Contractive Constraints

Decentralized Variable Structure Control for Uncertain Interconnected Systems

Hybrid Control of a Benchmark Cable-Stayed Bridge Considering Nonlinearity of a Lead Rubber Bearing

A Decentralized Control Algorithm for Large-Scale Building Structures.

Health Monitoring Of A Smart Base Isolated Benchmark Cable-Stayed Bridge Using Symptom Approach

Seismic Response Control of a Cable-Stayed Bridge Using Passive, Active, Semiactive and Hybrid Systems

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Sliding Mode Control of Cable-Stayed Bridge Subjected to Seismic Excitation

Control Of Underactuated Bridge Cranes: A Simplified Ida-Pbc Approach

STUDY ON THE FULL SCALE SEGMENTAL MODEL OF A TOWER OF A CABLE STAYED BRIDGE OF THE SECOND YANGIZE RIVER BRIDGE IN NANJING

A Wireless Decentralized Control Experimental Platform for Vibration Control of Civil Structures

A New Decentralised Controller Design Method for a Class of Strongly Interconnected Systems.

Multi-scale Analysis of the Steel Cable Anchorage System of Self-Anchored Suspension Bridges

Optimization of cable-stayed bridges with three-dimensional modelling

Monitoring and Control for Large Span Cable-stayed Bridge

4D Multi-Scale Analysis of the Hybrid Zone for Cable-Stayed Bridges with Steel-Concrete Hybrid Girders

Decentralized Control for Interconnected Systems with Arbitrary Topology and Communication Failure