Abstract:Earthquakes can cause significant damage to constructed structures, leading engineers to design systems that effectively reduce damage and improve real-time vibration control. While base isolation is a commonly used passive method for seismic protection in highway structures, it has limitations such as a lack of immediate adaptation, constrained power dissipation capacity, and poor performance during earthquakes. To address the limitations of passive base isolation bearings, a hybrid control system that includes semi-active MR dampers is being introduced into isolated highway bridge structures. The aim is to enhance vibration reduction and improve overall performance. One of the major challenges in implementing this technology is developing appropriate control algorithms to handle the nonlinear behavior of semi-active devices. This paper proposes an adaptive data-driven control algorithm, informed by evolutionary game theory and a multi-objective optimization process, to optimize the distribution of voltage to semi-active MR dampers based on measurements of the damper's response to input signals. The algorithm is designed to provide optimal seismic protection. The performance of the replicator dynamics in the control system depends on three critical parameters: total population, which represents the total available resources or the sum of actuator forces; growth rate, which is the rate at which resources are distributed among control devices; and the fictitious fitness function, which regulates power consumption. Previous studies used sensitivity analysis to ascertain the best values for population size and growth rate, a time-consuming and unreliable process. This study aims to improve the performance of the system by solving a multi-objective problem. The proposed approach integrates a control algorithm with a multi-objective optimization algorithm, namely NSGA-II, to find Pareto optimal values for all parameters of the replicator dynamics. These parameters include total population, growth rate, and the fictitious function, with the aim of ensuring sustainability. By considering multiple objectives simultaneously, the proposed approach can provide a more comprehensive and effective solution for the bridge control problem. The effectiveness of this proposed approach is demonstrated through sample results Utilizing a case study centered around the Southern California Interstate 91/5 Overcrossing Highway Bridge, which is exposed to seismic activities.

Hybrid Control of a Benchmark Cable-Stayed Bridge Considering Nonlinearity of a Lead Rubber Bearing

Seismic Response Control of a Cable-Stayed Bridge Using Passive, Active, Semiactive and Hybrid Systems

Semi-active control of a cable-stayed bridge under multiple-support excitations

Applications of Some Semiactive Control Systems to Benchmark Cable-Stayed Bridge

Sliding Mode Control of Cable-Stayed Bridge Subjected to Seismic Excitation

Phase I Benchmark Control Problem for Seismic Response of Cable-Stayed Bridges

Seismic performance improvement of continuous rigid-frame bridges with hybrid control system under near-fault ground motions

Semiactive Control of Nonlinear Parametric Vibration of Super-Long Stay Cable in Cable-Stayed Bridge Installed with Magnetorheological Fluid Damper

Study on the multi-criteria seismic mitigation optimization of a single pylon cable-stayed bridge across strike-slip fault rupture zones

Seismic damage control of nonlinear continuous reinforced concrete bridges under extreme earthquakes using MR dampers

Decentralized control design for a cable-stayed bridge benchmark

Multi-objective control optimization of isolated bridge using replicator controller and NSGA-II

SEISMIC RESPONSE CONTROL OF A CABLE-STAYED BRIDGE BY VARIABLE DAMPERS

State-Derivative Feedback Control Of Cable Vibration Using Semiactive Magnetorheological Dampers

System-based probabilistic evaluation of longitudinal seismic control for a cable-stayed bridge with three super-tall towers

Seismic response characteristics and performance improvement of near-fault continuous rigid-frame bridges

Seismic Mitigation Control for a Curved Continuous Girder Bridge with 3-D Ground Motion Action

A novel Horizontal Bidirectional Hybrid Damping System (HBHDS) for multi-level vibration control of long-span bridges: A theoretical study

4D Multi-Scale Analysis of the Hybrid Zone for Cable-Stayed Bridges with Steel-Concrete Hybrid Girders

Single input magnetorheological pseudo negative stiffness control for bridge stay cables

Health Monitoring Of A Smart Base Isolated Benchmark Cable-Stayed Bridge Using Symptom Approach