Abstract:The growing number of vehicle fire incidents on suspension bridges poses a significant threat to the safety of the cable body components of these structures. This study focuses on the Longtan Bridge and employs a coupled Computational Fluid Dynamics-Finite Element Method (CFD-FEM) approach to recreate the environment of a tanker truck fire. A three-dimensional heat transfer model of the cable components and a structural fire resistance analysis model of the entire bridge are established. The study reveals the heat transfer patterns of cable components under a tanker truck fire and the evolution of the bridge structure's performance. Additionally, fire protection measures for cable components are proposed. The results indicate that during a tanker truck fire, the bridge deck exhibits a spatial transient temperature field, with temperatures around the cable components reaching 1170 °C, causing the highest temperature experienced by the steel wires on the cable surface to reach 736 °C. Under fire conditions, there is a redistribution of internal forces between the cables, with the fire-affected cable experiencing a decrease in internal forces and significant increases in adjacent cables' internal forces. The fire leads to plastic deformation in the fire-affected cable, resulting in permanent damage to the cables. When the number of cables broken due to fire at the midspan of the Longtan Bridge reaches six, the stress in the adjacent cables reaches 1861 MPa, exceeding the cables' ultimate tensile strength, leading to a progressive collapse of the entire bridge structure. The proposed heat-expansion fireproof coating and combination fire protection measures meet the regulatory requirements for fire resistance. It is recommended to apply a 3.5 mm thick heat-expansion fireproof coating on the main cable and cable components of the Longtan Bridge for fire protection. The research findings can serve as a reliable basis for establishing a fire protection system for the cable components of the Longtan Bridge.

Replacement of the Fire-Damaged Long Suspenders of the Runyang Suspension Bridge

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Design and Dynamical Analysis of New Light Deployable Bridge

Research on fatigue failure and structural measures of suspenders in the Jinsha River railway suspension bridge

Evaluation of Flexible Central Buckles on Short Suspenders' Corrosion Fatigue Degradation on a Suspension Bridge under Traffic Load

Performance Monitoring of Damaged Bridge Members Strengthened with Carbon Fiber Reinforced Polymer

Fatigue life evaluation on wire rope suspenders of the suspension bridge based on a time-varying degradation process

Corrosion fatigue analysis of suspenders on continuous suspension bridge under combined action of wind and traffic

Replacement Construction of Gusset Plates at Adjustable Stringers for Rail-cum-Road Steel Truss Girder Bridge

Fatigue Analysis of Long-Span Steel Truss Arched Bridge Part II: Fatigue Life Assessment of Suspenders Subjected to Dynamic Overloaded Moving Vehicles

Study on the movements and bending stresses of hangers and control measures in self-anchored rail suspension bridges

Finite Element Modeling and Calibration of a Three-Span Continuous Suspension Bridge Based on Loop Adjustment and Temperature Correction

Static Response of Self-anchored Suspension Bridge under Vehicle Load Considering Time-varying Effects

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Comparative study on fatigue evaluation of suspenders by introducing actual vehicle trajectory data

Fire resistance analysis and protection measures for cable components of suspension bridges

Research on the longitudinal movement and influence of restraint parameters of the long-span suspension bridge’s main girder

Performance-Based Seismic Fragility and Residual Seismic Resistance Study of a Long-Span Suspension Bridge

Behavior of a Network Tied-Arch Bridge Subjected to Sudden Hanger Loss Scenarios

Impact of rigid central clamps on longitudinal deformation of long-span suspension bridges under vehicle excitations

A method for suspenders tension identification of bridges based on the spatio‐temporal correlation between the girder strain and suspenders tension