Abstract:The risk of large-amplitude vibrations of bridge hangers due to galloping instabilities has posed a challenge to the engineering and research communities. Galloping vibrations can lead to serviceability problems and reduce fatigue life. A number of aeroelastic models have been developed to predict the unstable behavior and to design counteracting measures, i.e., shape modifications and structural damping addition. All the proposed procedures generally consider that the parameters are assigned according to deterministic values. A framework is proposed for the deterministic and probabilistic assessment of the minimum structural damping required to prevent galloping of bridge hangers based on the output of a two-degree-of-freedom sectional quasi-steady aeroelastic model. All the variables required to define the hanger dynamics, the sheath aerodynamics, and the local wind climate are considered. Because of the large uncertainties and of the nonlinear nature of the problem, the distribution of the minimum structural damping required to prevent galloping is obtained by Monte Carlo simulations. An application of the method to the proposed Messina Straits crossing bridge is presented. Starting from wind tunnel measurements of the aerodynamic coefficients of a real plain high-density polyethylene (HDPE) cable sheath, the random nature of the aerodynamics is shown, which is ascribed to the cable irregularities (surface roughness, section distortion, and axis curvature). Then the statistical variation of the parameters of the model is considered, based on real data derived from wind tunnel tests and from the wind climate measured at the site. The distributions of the parameters defining the hanger dynamics are assigned according to typical values. Using a normal and a log-normal model of capacity, the probability of failure is calculated. The results are discussed and compared with conventional approaches based on the definition of the deterministic variables. Finally, using a deterministic model of capacity, a simplified closed-form equation for the evaluation of the structural damping needed to prevent galloping in a probabilistic-based performance approach is proposed.

Study on the movements and bending stresses of hangers and control measures in self-anchored rail suspension bridges

Fatigue Performance Assessment of Composite Arch Bridge Suspenders Based on Actual Vehicle Loads

Estimation of Tension Force in Short Hangers Using Added Mass Method

An Identification Method For Short Hanger Tension Of Arch Bridges

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Probabilistic Versus Deterministic Assessment of the Minimum Structural Damping Required to Prevent Galloping of Dry Bridge Hangers

Train-Induced Dynamic Behavior and Fatigue Analysis of Cable Hangers for a Tied-Arch Bridge Based on Vector Form Intrinsic Finite Element

Development of Corrosion-Fatigue Analysis Method of Cable Hangers in Tied-Arch Bridges Considering Train-Bridge Interaction

Dynamic Analysis of the Hangers in High-Speed Railway Arch Bridge Based on Train–Bridge Interaction Simulation and Field Measurement

Behavior of a Network Tied-Arch Bridge Subjected to Sudden Hanger Loss Scenarios

Investigation of longitudinal movements of girder ends considering various longitudinal non-linear resistances in railway suspension bridges

Research on fatigue failure and structural measures of suspenders in the Jinsha River railway suspension bridge

Spatial Analysis of Self-anchored Suspension Bridge and Its Experimental Study

Determination of Hanger T ensions for T ransition of Structural System of Spacial Cables Self-anchored Suspension Bridge

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Fatigue Analysis of Long-Span Steel Truss Arched Bridge Part II: Fatigue Life Assessment of Suspenders Subjected to Dynamic Overloaded Moving Vehicles

Static Response of Self-anchored Suspension Bridge under Vehicle Load Considering Time-varying Effects

Test on Forces in Flexible Hanger Rods in Combinatorial Bridges with Beams and Arches

Research on the longitudinal movement and influence of restraint parameters of the long-span suspension bridge’s main girder

Damage identification method for tied arch bridge suspender based on quasi-static displacement influence line

Evaluation of Flexible Central Buckles on Short Suspenders' Corrosion Fatigue Degradation on a Suspension Bridge under Traffic Load