Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. A novel cellular structure is proposed based on bionic structure with negative Poisson's ratio characteristic, and the cell is periodically expanded in the in-plane direction to create a new honeycomb structure. The influence of gradient changes of the structural parameters on the load-bearing capacity and damping characteristics of the structure is investigated through a combination method of finite element numerical simulations and experiments. The results indicate that the concentric gradient arrangement of cell wall thickness and angle parameters, and the symmetrical gradient arrangement of cell height, wall thickness and angle parameters have the most significant influence on the static bearing capacity of the structure. In contrast, the gradient arrangement under the corner circle diameter has minimal effect on the static bearing capacity of the structure. Under the same conditions, the peak values of the transmissibility of C2 (large angle at constraint end and loading end, and smaller angle in the middle) and C3 structures (angle gradually increases from the loading end to the constraint end) are significantly reduced between the frequency 2 Hz and 1024 Hz. The peak values of the transmissibility of the structures C2 and C3 are respectively decreased by 20% and 25% compared to that of the non-gradient structure. This shows that the vibration damping effect of these two structures is better. The structure with the gradient change and the structure without the gradient change of the new honeycomb structure can both achieve certain vibration reduction and isolation from the middle to high frequency range.

A novel butterfly-shaped auxetic structure with negative Poisson’s ratio and enhanced stiffness

A novel hybrid auxetic honeycomb with enhanced load-bearing and energy absorption properties

In-plane elasticity of a novel auxetic honeycomb design

A novel three-dimensional orthogonal star honeycomb structure with negative Poisson’s ratio

Novel Structure with Negative Poisson’s Ratio and Enhanced Young’s Modulus

A Novel Auxetic Honeycomb with Enhanced In-Plane Stiffness and Buckling Strength

Higher stiffness hierarchical embedded strengthening honeycomb metastructure with small negative Poisson's ratio reduction

Controllable Three-Dimension Auxetic Structure Design Strategies Based on Triply Periodic Minimal Surfaces and Dual Period Deformation Function

Graded Negative Poisson's Ratio Honeycomb Structure Design and Application

Band Gap Analysis of Star-Shaped Honeycombs with Varied Poisson’s Ratio

A novel hybrid-honeycomb structure: Enhanced stiffness, tunable auxeticity and negative thermal expansion

Graded negative Poisson’s ratio honeycomb structure design and application

Novel 2D star-shaped honeycombs with enhanced effective Young’s modulus and negative Poisson’s ratio

Mechanical performance study of high flexibility arrow-shaped concave arc bottoms negative Poisson's ratio honeycomb structure

An Auxetic Honeycomb Structure with Series-Connected Parallograms

A Novel Coupling-Induced Strength-Improved Three-Dimensional Honeycomb with Positive-Negative Dual Poisson's Ratios

Analyzing In-Plane Mechanics of a Novel Honeycomb Structure with Zero Poisson's Ratio

Design 3D improved star-shaped honeycomb with different tip angles from 2D analytical star-shaped model

Three-dimensional enhanced star-shaped honeycombs with negative thermal expansion

Mechanical properties of a novel negative Poisson's ratio gradient structure

Energy Absorption and Gradient of Hybrid Honeycomb Structure with Negative Poisson’s Ratio