Abstract:Metamaterials exhibiting exceptional thermoelastic properties are emerging as promising candidates for scientific and engineering applications. Previous studies on mechanical metamaterials with negative thermal expansion (NTE) have primarily focused on enhancing isotropic NTE, often resulting in a high coefficient of thermal expansion (CTE) but low stiffness that characterizes bending-dominated NTE metamaterials. In this study, we proposed a novel mechanical metamaterial with significant anisotropic thermal expansion behavior and substantial stiffness based on the cross structure, re-entrant structure, and triangular structure with NTE. The programmable CTE and effective elastic modulus were analytically derived using the unit load method and stiffness matrix method, respectively, which were validated by numerical results obtained from finite element analysis (FEA). Drawing inspiration from the body-centered cubic and face-centered cubic strategies, two types of extended three-dimensional metamaterials can be obtained. The results demonstrate that a larger length ratio lambda and angle theta(3) can enhance the NTE effect, while reducing the Young's modulus. The maximum magnitudes of NTE and positive thermal expansion (PTE) are achieved at approximately theta(2) = 90 degrees, resulting in a decreased stiffness and slight negative Poisson's ratio (NPR). By adjusting the angles theta(2) of re-entrant structures, six distinct anisotropic thermal expansion behaviors can be obtained in this planar metamaterial. Furthermore, a wider range of isotropic CTE as well as an extended range of anisotropic CTE can be achieved in the present metamaterial compared to its original metamaterials. The proposed metamaterial can be combined with traditional triangle metamaterials to enhance thermoelastic properties. The analysis also provides valuable insights into designing metamaterials with large CTE, optimal stiffness, and lightweight properties simultaneously for engineering applications.

A novel hybrid-honeycomb structure: Enhanced stiffness, tunable auxeticity and negative thermal expansion

A Novel Re-Entrant Honeycomb of Negative Thermal Expansion

A series of auxetic metamaterials with negative thermal expansion based on L -shaped microstructures

Three-dimensional enhanced star-shaped honeycombs with negative thermal expansion

Structural Mechanics of Negative Stiffness Honeycomb Metamaterials

In-plane elasticity of a novel auxetic honeycomb design

A novel design of mechanical metamaterial incorporating multiple negative indexes

A multifunctional three-dimensional lattice material integrating auxeticity, negative compressibility and negative thermal expansion

A Cellular Metastructure Incorporating Coupled Negative Thermal Expansion and Negative Poisson's Ratio

Novel Metamaterial Structures with Negative Thermal Expansion and Tunable Mechanical Properties

A Novel Cross Tetrachiral Honeycomb Metamaterial with Designable Static and Dynamic Performances

A novel butterfly-shaped auxetic structure with negative Poisson’s ratio and enhanced stiffness

Anisotropic Thermal Expansion Based on a Novel Metamaterial

An Auxetic Material With Negative Coefficient of Thermal Expansion and High Stiffness

Novel Structure with Negative Poisson’s Ratio and Enhanced Young’s Modulus

Low Frequency Bandgap and High Stiffness of Innovative Auxetic Metamaterial with Negative Thermal Expansion

An anisotropic negative thermal expansion metamaterial with sign-toggling and sign-programmable Poisson’s ratio

Higher stiffness hierarchical embedded strengthening honeycomb metastructure with small negative Poisson's ratio reduction

Multifunctional mechanical metamaterials with tunable double-negative isotropic properties

A Novel Re-Entrant-Type Metamaterial with Tunable Negative Poisson's Ratios and Coefficients of Thermal Expansion

Impact resistance of a double re-entrant negative poisson’s ratio honeycomb structure