Abstract:Under loss-of-coolant conditions, the temperature on fuel cladding will increase rapidly (up to 1000–1500 K), which will not only cause a dramatic oxidation reaction of Zircaloy-4 and an increase in hydrogen concentration but also cause an allotropic phase transformation of Zircaloy-4 from hexagonal (α-pahse) to cubic (β-phase) crystal structure. As we all know, thermophysical properties have a close relationship with the microstructure of the material. Moreover, because of an important influence of the phase transformation on the creep resistance and the ductility of the fuel rod, studying the crystallographic phase transformation kinetics is pivotal for evaluating properties for fuel rod completeness. We coupled the phase transformation model together with the existing physical models for reactor fuel, gap, cladding, and coolant, based on the finite element analysis and simulation software COMSOL Multiphysics. The critical parameter for this transformation is the evolution of the volume fraction of the favored phase described by a function of time and temperature. Hence, we choose two different volume fractions (0 and 10%) of BeO for UO 2 -BeO enhanced thermal conductivity nuclear fuel and zircaloy cladding as objects of this study. In order to simulate loss-of-coolant accident conditions, five relevant parameters are studied, including the gap size between fuel and cladding, the temperature at the extremities of the fuel element, the coefficient of heat transfer, the linear power rate, and the coolant temperature, to see their influence on the behavior of phase transformation under non-isothermal conditions. The results show that the addition of 10vol%BeO in the UO 2 fuel decreased the phase transformation effect a lot, and no significant phase transformation was observed in Zircaloy-4 cladding with UO 2 -BeO enhanced thermal conductivity nuclear fuel during existing loss-of-coolant accident conditions.

FORECASTING OF STRUCTURAL TRANSFORMATIONS IN HEAT AFFECTED ZONE STEEL OF 15Kh2NMFA AT ANTI-CORROSION CLADDING

A Multi-Phase Model for Transformation Plasticity Using Thermodynamics-Based Metallurgical Algorithm

Mechanisms of Pitting Corrosion of Austenitic Steels of Heat Exchangers in Circulating Waters and its Prediction

Accurate Prediction of Welding Stress Evolution by Considering Improved Phase Transformation Model

Estimation of Structural Degradation of the Heat Affected Zone of the Welded Joint Under Fatigue

Coupled Modeling and Simulation of Phase Transformation in Zircaloy-4 Fuel Cladding Under Loss-of-Coolant Accident Conditions

Kinetic Model for the Phase Transformation of High-Strength Steel under Arbitrary Cooling Conditions

3D Model of Heat Flow during Diffusional Phase Transformations

Modeling of Zircaloy Oxidation Through Dynamic Mesh Deformation

A Parameterized Leblond-Devaux Equation for Predicting Phase Evolution during Welding E36 and E36Nb Marine Steels

Analysis of Phase Transformation Simulation and Prediction of Phase Distribution in High Strength Steel in Hot Stamping

Numerical Simulation Of Beta To Alpha Phase Transformation In Heat Affected Zone During Welding Of Ta15 Alloy

Micromechanical Study of Heterogenous Deformation of Austenitic Stainless Steel Welded Joints at Different Temperatures

A Study of Decomposition of Supercooled Austenite in High-Strength Medium-Carbon Complexly Alloyed Cold-Resistant Steels

Investigation of Influence of Microstructure on FH32 Steel Corrosion Properties using Gleeble Simulation of Heat-Affected Zone and Electrochemical Methods

Theory and Modeling of Phase Transformations under Stress in Steel

Microstructural Deformation and Fracture of Reduced Activation Ferritic-Martensitic Steel EK-181 under Different Heat Treatment Conditions

Improving the Heat-Affected Zone's Width and Strength During Friction Stir Welding of 1cr11ni2w2mov Steel under Different Cooling Conditions: Thermo-Mechanical Modeling and Experimental Study

A thermal–metallurgical model of laser beam welding simulation for carbon steels

Software Application of Material Structure Prediction

The Prediction of Ferrite Ratio in HAZ of EH36 Steel Electro‐Gas Welding Joints Based on Leblond Equation