Abstract:Deoxidation of Ti, or direct removal of O dissolved in metallic Ti, is known to be extremely difficult when Mg is used as the deoxidizing agent. This difficulty arises because the chemical potential of O 2 , p O2 , under Mg/MgO equilibrium is high (approximately 10 −41 atm at 1200 K) and is equivalent to that of Ti containing ∼2 mass% O at 1200 K. Therefore, when deoxidizing Ti to the commercial level of high-grade pure Ti (below 0.05 mass% O) using an Mg reductant at 1200 K, the activity of the reaction product MgO ( a MgO ) must be decreased to below ∼0.025, which is difficult in practice. In this study, the removal of O in Ti in molten MgCl 2 salt using an electrochemical technique was examined at ∼1173 K with the objective of obtaining Ti containing less than 0.05 mass% O. Ti samples and graphite electrodes immersed in molten MgCl 2 served as the cathode and anode, respectively. A constant voltage was applied between the electrodes using an external DC source. Molten MgCl 2 was employed to produce the deoxidizing agent Mg and to facilitate deoxidation of Ti by decreasing the activity of the reaction product MgO. By applying a voltage of approximately 3.1 V between the electrodes, the chemical potential of Mg in the molten MgCl 2 was increased at the surface of the Ti cathode, and the Ti samples were deoxidized. The resulting O species, mainly formed O 2− dissolved in the molten MgCl 2 , was removed from the molten salt by reacting with the C anode to form CO (or CO 2 ) gas. Ti wires containing 0.12 mass% O were deoxidized to less than 0.02 mass% O. In some cases, the O concentration in the Ti samples was reduced to the level of 0.01 mass%, which cannot be accomplished using the conventional Kroll process. The possible application of this deoxidation technique to practical industrial recycling processes is discussed.

Electrochemical Reduction of Oxygen in Some Hydrophobic Room-Temperature Molten Salt Systems

Singlet Oxygen Triggered by Superoxide Radicals in a Molybdenum Cocatalytic Fenton Reaction with Enhanced REDOX Activity in the Environment.

Mechanisms of Electrocatalysis of Oxygen Reduction by Metal Porphyrins in Trifluoromethane Sulfonic Acid Solution

Revealing Salt-Expedited Reduction Mechanism for Hollow Silicon Microsphere Formation in Bi-Functional Halide Melts

A Study of the Influence of Lithium Salt Anions on Oxygen Reduction Reactions in Li-Air Batteries

One electron oxygen reduction in room temperature ionic liquids: A comparative study of Butler-Volmer and Symmetric Marcus-Hush theories using microdisc electrodes

Low-Polarization Lithium-Oxygen Battery Using [DEME][TFSI] Ionic Liquid Electrolyte

Concentrated Electrolyte for the Sodium-Oxygen Battery: Solvation Structure and Improved Cycle Life

Oxygen Reduction in Alkaline Media—a Discussion

Molecular-level insights into the reactivity of siloxane-based electrolytes at a lithium-metal anode.

Electrode/electrolyte Interface in the Li-O2 Battery: Insight from Molecular Dynamics Study

Molten salt oxidation of organic hazardous waste with high salt content

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Mechanistic Insight into Superoxide Radical-Mediated Degradation of Carbon Tetrachloride in Aqueous Solution: an in Situ Spectroscopic and Computational Study

Unveiling the spatially confined oxidation processes in reactive electrochemical membranes

Electrochemical and Mechanistic Study of Reactivities of α-, β-, γ-, and δ-Tocopherol toward Electrogenerated Superoxide in N,N-Dimethylformamide through Proton-Coupled Electron Transfer

Reducing Carbon Contamination by Controlling CO32− Formation During Electrochemical Reduction of TiO2

Compatibility of lithium salts with solvent of the non-aqueous electrolyte in Li-O2 batteries.

A Molten Salt Lithium-Oxygen Battery

Direct oxygen removal technique for recycling titanium using molten MgCl 2 salt

Ionic Liquids Combined with Pt-modified Ordered Mesoporous Carbons As Electrolytes for the Oxygen Sensing