Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Coupled Bending-Torsional Dynamic Response of Axially Loaded Slender Composite Thin-Walled Beam with Closed Cross-Section

A Numerically Stable Dynamic Coefficient Method and Its Application in Free Vibration of Partial-Interaction Continuous Composite Beams

Analysis of Pure Torsion for Thin-Walled Composite Mono-Box Beams with Multi-Cells

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Effect of Compressive Axial Load on Forced Transverse Vibrations of a Double-Beam System

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

An Exact Theory for Curved Beams with Any Thin-Walled Open Sections

Dynamic modeling for rotating composite Timoshenko beam and analysis on its bending-torsion coupled vibration

Vibration and buckling of a double-beam system under compressive axial loading

Free vibration analysis of rotating composite Timoshenko beams with bending-torsion couplings

Dynamic analysis of partial-interactive composite beam with axial force

Experimental and Numerical Analysis of Triply Coupled Vibration of Thin-Walled Beam with Arbitrary Closed Cross-Section

A Finite Element Formulation for Bending-Torsion Coupled Vibration Analysis of Delaminated Beams under Combined Axial Load and End Moment

Dynamic Analysis of Partial-Interaction Composite Beams

A nonlinear dynamical model for rotating composite thin-walled beams subjected to hygrothermal effects

Dynamic Behaviors of General Composite Beams Using Mixed Finite Elements

A unified thermal vibration and transient analysis for quasi-3D shear deformation composite laminated beams with general boundary conditions

Test and Numerical Model of Curved Steel-Concrete Composite Box Beams under Positive Moments

Dynamic Response of Axially Functionally Graded Beam with Longitudinal–transverse Coupling Effect

Dynamic modeling and coupling characteristics of rotating inclined beams with twisted-shape sections

Combined Torsional-Bending-Axial Dynamics of a Twisted Rotating Cantilever Timoshenko Beam With Contact-Impact Loads at the Free End