Abstract:The conventional method (CM) for shear lag analysis of thin-walled box girders supposes that the neutral axis coincides with the centroidal axis of the whole cross section, and thus neglects the axial equilibrium condition. An analytical method considering axial equilibrium and shear deformation, which is referred to as PM, is proposed for overcoming the defect of the conventional method. The longitudinal displacement of the web is introduced to satisfy the axial equilibrium condition and locate the neutral axis automatically. The shear deformation is considered according to the Timoshenko beam theory. Three independent shear lag functions are adopted for describing different shear lag intensities of the top, bottom and cantilever slabs. The governing differential equations for the displacement variables are deduced by means of the virtual work theorem and solved with the relevant boundary conditions. The analytical solution is then derived for the distance from the neutral axis to the top fiber of the cross section. The accuracy of the proposed method is validated by comparisons with the available experimental data as well as the finite element analysis results. Moreover, the distances from the neutral axis to the top fiber, axial forces, and stress difference ratios are analyzed for typical thin-walled box girders to quantify the influence of the axial equilibrium condition. Finally, an extensive parametric study is conducted to examine the effects of various geometric parameters on the stress difference ratio under different load types. The results show that the proposed method can provide good predictions for both deflections and axial stresses, and neglecting axial equilibrium leads to considerable underestimations of axial stresses especially at the top flange-web junctions over the interior support of the continuous box girder.

Analysis of Pure Torsion for Thin-Walled Composite Mono-Box Beams with Multi-Cells

A Numerically Stable Dynamic Coefficient Method and Its Application in Free Vibration of Partial-Interaction Continuous Composite Beams

A New Derivation of the Buckling Theory of Thin-Walled Beams

An Exact Theory for Curved Beams with Any Thin-Walled Open Sections

A Controversy and Its Settlement in the Calculation of Buckling Moments of Thin-walled Beams with Monosymmetrical I-sections under Distributed Loads

Analytical Theory of Composite Beams with CSWs Using the State Space Method

Reduced Stiffness of Composite Beams Considering Slip and Shear Deformation of Steel

Coupled Bending-Torsional Dynamic Response of Axially Loaded Slender Composite Thin-Walled Beam with Closed Cross-Section

Free vibration analysis of rotating composite Timoshenko beams with bending-torsion couplings

Analysis Of Multicell Thin-Walled Beams Under Large Deflection And Small Strain Deformation

Improved method for shear lag analysis of thin-walled box girders considering axial equilibrium and shear deformation

ANALYSIS OF COMPOSITE ACTIONS IN STEEL-CONCRETE COMPOSITE BEAMS SUBJECTED TO TORSION

Coupled bending-torsion behaviour of single-box multi-cell curved composite box-girders with corrugated-steel-webs

ANALYSIS ON TORSIONAL STIFFNESS FOR COMPOSITE STEEL-CONCRETE BEAMS

Analysis of Geometrically Exact Beams with Torsion-Warping Deformation by Weak Form Quadrature Elements

Nonlinear Analysis of Pure Torsion Property for Prestressed Concrete Composite Box Girders with Corrugated Steel Webs

ANALYSIS OF SECONDARY TORSION OF BIAXIAL FLEXURAL REINFORCED CONCRETE BEAMS

Experimental Study on Composite Steel-concrete Beams with Box Sections Under Combined Bending and Torsion

Full-course analysis on torsional performance of composite steel -concrete beams

Nonlinear analysis of composite steel-concrete beams with open sections under combined bending and torsion

Torsional Experiment and Analysis on Composite Steel-Concrete Beams