Abstract:The vertical and horizontal bending of micro-beams subjected to axial compressive and transverse concentrated loadings is a common lateral deformation in micro-/nano-engineering that plays a significant role in the design and optimization of micro-/nano-devices. The present study aims to investigate it using the nonlocal theory. For this purpose, the simplified mathematical model is developed, and the nonlocal differential constitutive equation is applied. Since the mechanical properties of micro-beams are different from those of macro-beams, the non-classical nonlocal bending moment is introduced to improve the classical bending formulation in order to adapt to the vertical and horizontal bending of micro-beams. The effects of the external load, external size, structural stiffness, and internal characteristic scale on the vertical and horizontal bending deformation including the midpoint deflection and critical compression are presented. The present analytical model and results are validated by the finite element method. It is shown that the critical compression decreases with increasing the internal characteristic scale. Moreover, the midpoint deflection varies remarkably with respect to the axial and transverse loadings, structural stiffness, internal characteristic scale, and external size. An obvious nonlocal scale effect is found, in which the internal characteristic scale cannot be neglected compared with the external size. Besides, a threshold value of the structural stiffness is determined, and the connotation of the nonlocal interaction requires that the structural stiffness shall not be lower than that threshold. A mutual restriction between structural stiffness and external loadings is observed in the vertical and horizontal bending. In particular, it is further proved that the classical continuum mechanics can not be used in micro-/nano-scaled mechanics through a strange phenomenon that is contrary to mechanical common sense in the calculation example. The study is expected to be beneficial to the design and application of micro-beams subjected to the vertical and horizontal bending.

Analysis Of Multicell Thin-Walled Beams Under Large Deflection And Small Strain Deformation

Exact Analysis of Bi-Directional Functionally Graded Beams with Arbitrary Boundary Conditions Via the Symplectic Approach

Analysis of Pure Torsion for Thin-Walled Composite Mono-Box Beams with Multi-Cells

A New Derivation of the Buckling Theory of Thin-Walled Beams

Elastoplastic Analysis with Fine Beam Model of Vector Form Intrinsic Finite Element

OUT-OF-PLANE STABILITY OF MONOSYMMETRIC WEB-TAPERED I-BEAMS

Fully Conforming Plane Beam Element for Large Deformation Analysis

Large Deflection Analysis of 3D Steel Frame Using Finite Particle Method

LATERAL BUCKLING ANALYSIS OF THIN-WALLED CURVED BEAMS

A data-driven procedure for one-dimensional dynamic analysis of thin-walled beams with arbitrary cross-sections

Analysis of Geometrically Exact Beams with Torsion-Warping Deformation by Weak Form Quadrature Elements

Numerical Analysis for Geometry Nonlinear Characters of Laminated Box Beam Columns

Large deflection of adaptive multilayered Timoshenko beams

On Nonlocal Vertical and Horizontal Bending of a Micro-Beam

Large deformations of hyperelastic curved beams based on the absolute nodal coordinate formulation

Three-dimensional beam element for pre- and post-buckling analysis of thin-walled beams in multibody systems

Large Deformation Analysis of a Cantilever Beam Made of Axially Functionally Graded Material by Homotopy Analysis Method

Generalized Conforming Element For The Analysis Of The Laminated Composite Plates

Bending and Buckling Analysis of Functionally Graded Euler–Bernoulli Beam Using Stress-Driven Nonlocal Integral Model with Bi-Helmholtz Kernel

Application of the Variational Method to the Large Deformation Problem of Thin Cylindrical Shells with Different Moduli in Tension and Compression

A unified thermal vibration and transient analysis for quasi-3D shear deformation composite laminated beams with general boundary conditions