Abstract:In order to clarify the magnetic-thermal-force changing rule of high-frequency transformers under different winding arrangements, this paper tests the magnetization and loss characteristics of nanocrystalline materials at different temperatures, and based on the magnetization and loss data, establishes a magnetic-thermal-force coupling calculation model of 15 kVA, 5 kHz nanocrystalline high-frequency transformers, and calculates and analyzes the magnetic flux density, loss and temperature rise distributions of high-frequency transformers with three different winding arrangements under no-load and short-circuit conditions, respectively. Through comparative analysis, it was found that under no-load conditions, the cross-transposition of winding has less influence on the magnetic flux of the high-frequency transformer core, but it can reduce the iron-core loss and transformer temperature rise. The cross-transposition of winding under short-circuit conditions can significantly reduce the leakage magnetic field strength of high-frequency transformers; complete cross-transposition weakens the high-frequency transformer losses and temperature rise better than partial cross-transposition. According to the winding current density and core leakage field distribution under short-circuit conditions, we calculated and analyzed the distribution of its the axial and radial electromagnetic forces. The results show that the axial electromagnetic force causes the winding to be squeezed from both ends to the middle, the radial electromagnetic force causes the primary winding to shrink inward and the secondary winding to expand outward, so cross-transposition can greatly reduce electromagnetic force and weakening the deformation of the winding. Therefore, high-frequency transformers of winding cross-transposed should be used in actual projects to reduce transformer temperature rise and improve efficiency and security. This research has theoretical significance for the multi-physical field coupling of high-frequency transformers and its structural design.

Experimental and numerical study of high frequency superconducting air-core transformer

Experimental Characterization of Hybrid Temperature and Frequency Effects on the Performance of Transformers on Silicon Substrate

Modelling and Theoretical Analysis of an Air-Core Transformer with Strong Coupled Schemes

Design and Electromagnetic Analysis of Hybrid Megawatt High Temperature Superconducting Transformer

Theoretical Analysis and Experiment Research of High Temperature Superconducting Air-Core Transformer

Electromagnetic Field Analysis and Optimization Method of High-Temperature Superconducting Transformer under the Influence of Abnormal Voltage

Study on Novel Air-Core Transformer Type SCFCL with a Trigger Winding

High Temperature Superconducting Transformer Operating at an Increased Frequency of Alternating Current

Electromagnetic Analysis Of An Air-Core Hts Transformer

Experimental and Numerical Study of Frequency-Dependent Transport Loss in YBa2Cu3O7–δ Coated Conductors with Ferromagnetic Substrate and Copper Stabilizer

Research on Magnetic-Thermal-Force Multi-Physical Field Coupling of a High-Frequency Transformer with Different Winding Arrangements

A Review of Magnetic Core Materials, Core Loss Modeling and Measurements in High-Power High-Frequency Transformers

Experimental study and analysis on transfer characteristics of air-core current transformer

Study on the Influence of Skin Effect on AC Loss of YBCO Tape

Vibration and Noise Measurement of medium-high frequency Transformer Cores under Non-Sinusoidal Excitation

The Relationship Between AC Loss of YBCO Superconducting Coil and Current Waveform, Amplitude, Frequency and Temperature

Comparative Analysis of Magnetic Core Loss Measurement Methods with Arbitrary Excitations

Evaluations and Measurements of A High Frequency Nanocrystalline Core Transformer for Power Converters

Theoretical and experimental study of AC loss in HTS single pancake coils

Optimal Design and Implementation of High-Voltage High-Power Silicon Steel Core Medium-Frequency Transformer

FEM modeling of AC loss in YBCO coated conductor