Abstract:Samarium cobalt permanent magnets have been widely used for their excellent intrinsic magnetic properties such as very high Curie temperature, high anisotropy fields and most importantly excellent temperature coefficients of induction and coercivity. These materials have continuing industrial interest especially for applications operating at elevated temperatures and in the presence of high demagnetizing fields, such as particle accelerators, high frequency traveling wave tubes (TWTs), servo-motors and automotive and aerospace applications. An area of opportunity for improving performance of SmCo magnets is increasing magnet toughness — resistance to fracture. Like all other sintered rare earth magnetic materials, SmCo magnets are based on intermetallic compounds which are intrinsically brittle and can crack in the course of fabrication, machine work, and installation in the application. Increased toughness would also reduce handling sensitivity of magnetized magnets. For many years, studies on SmCo magnets have been focused on their magnetic properties, but the mechanical characteristics, strengthening and toughening mechanisms have been rarely reported. Understanding the phase and structural transformations induced in the SmCo magnets during the manufacturing process offers insight into potential modifications — chemical or processing-related. In this study, microstructural characterizations of 1:5 and 2:17 Sm-Co magnets were carried out using optical and scanning electron microscopes. In scanning electron microscopy (SEM), backscattered electron imaging and energy dispersive X-ray (EDX) microanalysis were used to investigate different phases and oxides. Finally, crystal structure of the magnets was studied using an X-ray diffractometer (XRD). The study correlates the microstructure characterization with the thermal processing history of different grades of SmCo magnets.

First principles study of transition-metal substitutions in Sm–Co permanent magnets

Atomic-scale structure clarification of the planar Z phase and its influence on the magnetic properties in Sm(CoFeCuZr) permanent magnets

Formation of cellular/lamellar nanostructure in Sm$_2$Co$_{17}$-type binary and ternary Sm-Co-Zr magnets

Revisiting the Structural and Magnetic Properties of SmCo5/Sm2Co17 Interface from First-Principles Investigations

Chemical Segregation Mechanism and Magnetic Properties of Sm2Co17-based Permanent Magnets: Experimental Investigation and First-Principles Calculations

Atomic-scale Structure Clarification of the Planar Z Phase and Its Influence on the Magnetic Properties in Sm(CoFeCuZr)z Permanent Magnets

First-principles Study of Site Preferences for Fe in Sm(CoFeCuZr)z Permanent Magnets

Magnetic properties and microstructure of Sm2Co 17-based high temperature permanent magnet

First-Principle Calculation on the Effect of Mn and in on the Structural Stability and Magnetic Moment of SmCo7 Alloys

First-Principles Calculations on Structural and Magnetic Properties of SmCo 3 Alloys Doped with Transition Metal Elements

Magnetic Properties and Microstructure of Sm<sub>2</sub>Co<sub>17</sub>-Based High Temperature Permanent Magnet

Phase separation and chemistry evolution in Fe-rich Sm(CobalFe0.31Cu0.07Zr0.025)7.7 magnets: The effect of initial defect

Microstructure and Coercivity Mechanism of Sm2Co17 Type High Temperature Rare-Earth Permanent Magnets

Microstructure and magnetic properties of Sm2Co17-based high temperature permanent magnets

Enhancing ferromagnetism in the Sm(Co, Mn) 5 system: impact on phase stability and magnetic properties

On Structural and Magnetic Properties of Substituted SmCo5 Materials

Correlation between ordered solid solution and cellular structure of Sm2Co17 type magnets with high iron content

Magnetic Properties and Microstructure of Sm<sub>2</sub>Co<sub>17</sub>-Based High Temperature Permanent Magnet

Identifications of SmCo5 and Sm+1Co5−1-type Phases in 2:17-Type Sm-Co-Fe-Cu-Zr Permanent Magnets

Phase Separation and Chemistry Evolution in Fe-Rich Sm(Co Balfe 0.31cu 0.07zr 0.025) 7.7 Magnets: the Effect of Initial Defect

Microstructural Characterization of Sm-Co Magnets

First principles study of transition-metal substitutions in Sm–Co permanent magnets

Atomic-scale structure clarification of the planar Z phase and its influence on the magnetic properties in Sm(CoFeCuZr) permanent magnets

Formation of cellular/lamellar nanostructure in Sm$_2$Co$_{17}$-type binary and ternary Sm-Co-Zr magnets

Revisiting the Structural and Magnetic Properties of SmCo5/Sm2Co17 Interface from First-Principles Investigations

Chemical Segregation Mechanism and Magnetic Properties of Sm2Co17-based Permanent Magnets: Experimental Investigation and First-Principles Calculations

Atomic-scale Structure Clarification of the Planar Z Phase and Its Influence on the Magnetic Properties in Sm(CoFeCuZr)z Permanent Magnets

First-principles Study of Site Preferences for Fe in Sm(CoFeCuZr)z Permanent Magnets

Magnetic properties and microstructure of Sm2Co 17-based high temperature permanent magnet

First-Principle Calculation on the Effect of Mn and in on the Structural Stability and Magnetic Moment of SmCo7 Alloys

First-Principles Calculations on Structural and Magnetic Properties of SmCo 3 Alloys Doped with Transition Metal Elements

Magnetic Properties and Microstructure of Sm<sub>2</sub>Co<sub>17</sub>-Based High Temperature Permanent Magnet

Phase separation and chemistry evolution in Fe-rich Sm(CobalFe0.31Cu0.07Zr0.025)7.7 magnets: The effect of initial defect

Microstructure and Coercivity Mechanism of Sm2Co17 Type High Temperature Rare-Earth Permanent Magnets

Microstructure and magnetic properties of Sm2Co17-based high temperature permanent magnets

Enhancing ferromagnetism in the Sm(Co, Mn) 5 system: impact on phase stability and magnetic properties

On Structural and Magnetic Properties of Substituted SmCo5 Materials

Correlation between ordered solid solution and cellular structure of Sm2Co17 type magnets with high iron content

Magnetic Properties and Microstructure of Sm&lt;sub&gt;2&lt;/sub&gt;Co&lt;sub&gt;17&lt;/sub&gt;-Based High Temperature Permanent Magnet

Identifications of SmCo5 and Sm+1Co5−1-type Phases in 2:17-Type Sm-Co-Fe-Cu-Zr Permanent Magnets

Phase Separation and Chemistry Evolution in Fe-Rich Sm(Co Balfe 0.31cu 0.07zr 0.025) 7.7 Magnets: the Effect of Initial Defect

Microstructural Characterization of Sm-Co Magnets

Magnetic Properties and Microstructure of Sm<sub>2</sub>Co<sub>17</sub>-Based High Temperature Permanent Magnet