Abstract:Industrial interest in wrought heat-treatable aluminium-lithium (Al–Li) based alloys dates back to around 1919 in Germany. However the exploitation of these alloys has historically been limited by their mechanical property anisotropy and concerns over their localized corrosion resistance and temperature stability. Recently, in the last ten years, alloy and process development has resulted in alloy compositions and thermomechanical treatments that potentially can overcome these issues. To put these developments in perspective we have reviewed the corrosion characteristics of first, second and third generation alloys with an emphasis on localized corrosion (intergranular and exfoliation) and stress corrosion cracking (SCC).Intergranular corrosion susceptibility of Al–Li–Cu and Al–Li–Cu–Mg alloys increases with copper content, and the depth of attack increases with ageing, i.e. UA<PA<OA. For alloys that contain zinc the mode of attack is less truly intergranular and more intra-granular or inter-subgranular in nature. Susceptibility to exfoliation corrosion has a similar temper dependence when assessed by conventional EXCO testing, but not following either exposure to a “real-life” outdoor marine environment or to a less aggressive test such as MASTMAASIS. In these tests there are two regimes of exfoliation susceptibility corresponding to under- and over-aged tempers, and an intermediate regime, including peak-aged tempers, with an improved resistance, i.e., UA>PA<OA.SCC initiation from smooth surfaces is rare for copper-free Al–Li alloys irrespective of temper or whether exposure is under continuous or alternate immersion conditions. For copper-containing alloys, initiation remains difficult for smooth specimens under continuous immersion conditions, but occurs readily under conditions of alternate immersion. It is likely that crack initiation is controlled by an anodic dissolution dominated process, but crack propagation may be controlled by either anodic dissolution or a hydrogen related process.Test results reviewed to date on thin plate samples show that the lower lithium content third generation Al–Li alloys, with suitable zinc and/or silver additions and thermomechanical processing can provide an acceptable resistance to localized corrosion (IGC and Exfoliation) and SCC in near to peak aged tempers. For this conclusion to apply to thicker products (>~30 mm) further analysis of corrosion test results is required.

Recent developments in the weldability of lithium-containing aluminium alloys

Welding Aspects of Aluminum–Lithium Alloys

Problems and issues in laser beam welding of aluminum–lithium alloys

Mechanical and metallurgical characterization of 8090 Al–Li alloy welded joints

Arc-Welding: Lithium-Containing Aluminum Alloys

Reduced Hot Cracking Susceptibility by Controlling the Fusion Ratio in Laser Welding of Dissimilar Al Alloys Joints

Status and prospects for aluminium-lithium alloys in aircraft structures

Strength, deformation, fracture behaviour and ductility of aluminium-lithium alloys

A Mechanism for the Formation of Equiaxed Grains in Welds of Aluminum–lithium Alloy 2090

Microstructural Evolution and Interfacial Crack Corrosion Behavior of Double-Sided Laser Beam Welded 2060/2099 Al-Li Alloys T-joints

Physical metallurgy of aluminum-lithium alloys

Mechanical behaviour of aluminium-lithium alloys

Research Progress of New Generation of Aluminum‐Lithium Alloys Alloying

Microstructure and Mechanical Properties of Tungsten Inert Gas Weld Joints of Sprayed and Cast Aluminium–Lithium Alloy

Corrosion Resistance of 2060 Aluminum⁻Lithium Alloy LBW Welds Filled with Al-5.6Cu Wire

The role of filler wire and scanning strategy in laser welding of difficult-to-weld aluminum alloys

Microstructure, tensile properties and fracture behaviour of an Al-Cu-Li-Mg-Zr alloy 8090

Corrosion and Stress Corrosion of Aluminum–Lithium Alloys

Microstructure Evolution and Mechanical Properties of AA2195-T8 Al-Li Alloy Back Gas-Shielded VPPA Weld

Nano-indentation and In-Situ Investigations of Double-Sided Laser Beam Welded 2060-T8/2099-T83 Al-Li Alloys T-joints

Double-sided Laser Beam Welded T-joints for Aluminum-Lithium Alloy Aircraft Fuselage Panels: Effects of Filler Elements on Microstructure and Mechanical Properties