Abstract:Industrial interest in wrought heat-treatable aluminium-lithium (Al–Li) based alloys dates back to around 1919 in Germany. However the exploitation of these alloys has historically been limited by their mechanical property anisotropy and concerns over their localized corrosion resistance and temperature stability. Recently, in the last ten years, alloy and process development has resulted in alloy compositions and thermomechanical treatments that potentially can overcome these issues. To put these developments in perspective we have reviewed the corrosion characteristics of first, second and third generation alloys with an emphasis on localized corrosion (intergranular and exfoliation) and stress corrosion cracking (SCC).Intergranular corrosion susceptibility of Al–Li–Cu and Al–Li–Cu–Mg alloys increases with copper content, and the depth of attack increases with ageing, i.e. UA<PA<OA. For alloys that contain zinc the mode of attack is less truly intergranular and more intra-granular or inter-subgranular in nature. Susceptibility to exfoliation corrosion has a similar temper dependence when assessed by conventional EXCO testing, but not following either exposure to a “real-life” outdoor marine environment or to a less aggressive test such as MASTMAASIS. In these tests there are two regimes of exfoliation susceptibility corresponding to under- and over-aged tempers, and an intermediate regime, including peak-aged tempers, with an improved resistance, i.e., UA>PA<OA.SCC initiation from smooth surfaces is rare for copper-free Al–Li alloys irrespective of temper or whether exposure is under continuous or alternate immersion conditions. For copper-containing alloys, initiation remains difficult for smooth specimens under continuous immersion conditions, but occurs readily under conditions of alternate immersion. It is likely that crack initiation is controlled by an anodic dissolution dominated process, but crack propagation may be controlled by either anodic dissolution or a hydrogen related process.Test results reviewed to date on thin plate samples show that the lower lithium content third generation Al–Li alloys, with suitable zinc and/or silver additions and thermomechanical processing can provide an acceptable resistance to localized corrosion (IGC and Exfoliation) and SCC in near to peak aged tempers. For this conclusion to apply to thicker products (>~30 mm) further analysis of corrosion test results is required.

Welding Aspects of Aluminum–Lithium Alloys

Recent developments in the weldability of lithium-containing aluminium alloys

Problems and issues in laser beam welding of aluminum–lithium alloys

Reduced Hot Cracking Susceptibility by Controlling the Fusion Ratio in Laser Welding of Dissimilar Al Alloys Joints

Friction stir welding of aluminium alloys: An overview of experimental findings – Process, variables, development and applications

Strength, deformation, fracture behaviour and ductility of aluminium-lithium alloys

Microstructure and Mechanical Properties of Tungsten Inert Gas Weld Joints of Sprayed and Cast Aluminium–Lithium Alloy

Prediction of the influence of welding metal composition on solidification cracking of laser welded aluminum alloy

Inhibiting weld cracking in high-strength aluminium alloys

Interfacial Microstructural and Corrosion Characterizations of Friction Stir Welded AA6061-T6 and AISI304 Materials

The role of filler wire and scanning strategy in laser welding of difficult-to-weld aluminum alloys

Enhancement of microstructure and mechanical properties of similar and dissimilar aluminium alloy by friction stir welding/processing using nanoparticles: a review

Arc-Welding: Lithium-Containing Aluminum Alloys

Corrosion and Stress Corrosion of Aluminum–Lithium Alloys

Formation Mechanisms and Control Strategies of FQZ Softening in Al–Li Alloy Welded Joint

Mechanical behaviour of aluminium-lithium alloys

Research progress of aluminum alloy welding technology

Mechanical and metallurgical characterization of 8090 Al–Li alloy welded joints

Structure and mechanical properties of aluminum-lithium alloy 1420 with a weld

Microstructural Evolution and Interfacial Crack Corrosion Behavior of Double-Sided Laser Beam Welded 2060/2099 Al-Li Alloys T-joints

Nanoparticle-enabled phase control for arc welding of unweldable aluminum alloy 7075