Abstract:The deflection squeezing of the shield shell and the eccentric jack thrust significantly impact the segment dislocation and damage. Based on summarizing the derivative relationship between engineering factors and disasters, this study established a 3D numerical calculation model under the multi-source load coupling. Then, this study explored the displacement and dislocation distribution of segments, as well as their derivative relationship with bolt failure. Furthermore, this study analyzed the spatial distribution and evolution characteristics of segment damage. Further revealing the disaster mechanism and proposing the engineering treatment measures. The research results indicate that as the deflection angle increases, the vertical relative compression deformation of the segment that is detaching from the shield tail (segment-DFST) becomes more significant. The plastic strain of the internal bolts inside the two segments in direct contact with the shield shell is mainly related to the radial and longitudinal dislocation. The increase in the deflection angle will lead to a more significant increase in the adjacent dislocation on both sides and the internal dislocation. The plastic strain of the internal bolts of the segment that is completely in the shield shell (segment-CSS) is more influenced by joint opening and longitudinal dislocation under the lower eccentric compression (LEC) state. The plastic strain of the internal bolts in segment-DFST is more influenced by radial dislocation and joint opening under the LEC state. The tension damage of the segments mainly occurs on both sides of the circumferential joint and the lower part of the segment-CSS. The compression damage of the segments is mainly distributed at the top and bottom of the segment-CSS. The eccentric distribution of jack thrust has the most significant impact on the block damage of the lower part of the segment-CSS. With the increase of the deflection angle, the compression damage and distribution range of the blocks at the bottom of the segment-DFST increase sharply. The compression damage and distribution range of the segment-CSS gradually spread from the upper and lower parts to the middle of the segment. The increase in deflection angle will promote the influence of the thrust in LEC state on the compression damage of the lower block of the segment-CSS, and on the tension damage of the upper block of the segment- DFST.

Deformation Behavior of Shield Segment Joint Controlled by Bolt and Positioning Tenon

Numerical Study on the Longitudinal Deformation Pattern of Shield Tunnel

Influence of Interference Fit Size on Hole Deformation and Residual Stress in Hi-Lock Bolt Insertion

Experimental and Numerical Analyses of the Shimming Effect on Bolted Joints with Nonuniform Gaps

Full-scale Loading Test for Shield Tunnel Segments: Load-bearing Performance and Failure Patterns of Lining Structures

Full-scale test and numerical simulation of three-ring staggered-joint shield segment reinforcement under ultimate load conditions

Simulation and Analysis on the Mechanical Properties of a New Slide-in Joint for Shield Tunnel Segment

Numerical study on mechanical behavior and ultimate bearing capacity of shield segment joints under different load conditions

Analysis of longitudinal deformation for shield tunnel based on segment dislocation mode

Disaster mechanism of large-diameter shield tunnel segments under multi-source load coupling: A case study

Full-scale testing and numerical modelling of segmental-joint performance with corroded bolt

Mechanical Analysis of Segment Floating During Shield Tunnel Construction

Study on inner force and dislocation of segments caused by shield machine attitude

An Analytical Solution for the Failure Process of a Shield Tunnel Segmental Joint with a Load-Transferring Gasket

Characterization of Shear Damage and Channel Reinforcement of Circumferential Joints between Shield Tunneling Segments Based on Numerical Simulation

Investigation of mechanical failure performance of a large-diameter shield tunnel segmental ring

Numerical Study on High Stiffness Segmental Joints of Shield Tunnels

Assessment of Reinforcement Effect of FRP-Strengthened Shield Segment Joint Based on the CZM Model

Experimental Study on the Axial Compressive Strength of Vertical Inner Plate Reinforced Square Hollow Section T-joints

Ultimate Tensile Behavior of Bolted T-stub Connections with Preload

Experimental study on the mechanical behavior of segmental joints of shield tunnels strengthened by a steel plate-UHPC composite