Abstract:The main safety issue of lithium-ion batteries (LIBs) is thermal runaway (TR), which has greatly hindered the application of LIBs. Phase change materials (PCM) have been used in battery modules as a thermal management method due to the heat absorption function during the phase change process. However, the role of PCM in TR propagation mitigation has not been carefully examined. In this paper, a 1D heat transfer model was developed to predict the mitigation effect of PCM on TR propagation of a battery array, which shows the superiority of high simulation speed and accuracy. The effects of thermo-physical parameters of PCM on cascading cell-to-cell thermal runaway propagation behavior were investigated. In addition, we gave an optimal range of key parameters of PCM based on safe regulations of China and the United Nations regarding to the TR in electric vehicle LIBs. It was found that the latent heat, density and heat capacity of PCM have similar effects on TR propagation behavior. With the increase of the three PCM parameters, the time duration between cell-to-cell failure propagation increases linearly, which shows a slower TR propagation rate. The optimal ranges for density, heat capacity and latent heat of PCM are over 2150 kg·m −3 , over 4100 J·kg −1 ·K −1 and over 9 × 10 5 J·kg −1 , respectively. What's more, the TR propagation will exacerbate with the increase of thermal conductivity of PCM, which reminds us to notice a balance between thermal management and TR mitigation in PCM-based thermal management system. Generally, through analyzing the effect of thermal diffusivity of PCM in TR inhibition, we found higher thermal diffusivity will speed up the propagation of TR. And the TR propagation speed is more sensitive to the change of density of PCM. The thermal diffusivity of PCM should be less than 9 × 10 −7 m 2 ·s −1 to satisfy the safety standards. The PCM manifests great performance in retarding TR propagation with the phase transition temperature in the range from 318.15 to 518.15 K. Moreover, we found that there exists a critical PCM thickness over which TR propagation will not occur. As the battery thickness increases from 8.8 to 56.5 mm, the critical PCM thickness shows a non-monotonic variation trend (increasing at first and decreasing later). This study demonstrates the feasibility of using PCM as a thermal runaway mitigation strategy and provides a guideline for the optimization of physical parameters of PCM.

Temperature mitigation effect of phase change material on overcharging lithium-ion batteries: an experimental study

Experimental and Numerical Study of PCM Thermophysical Parameters on Lithium-Ion Battery Thermal Management

Probing the Cooling Effectiveness of Phase Change Materials on Lithium-Ion Battery Thermal Response under Overcharge Condition

Effect of High Temperature Circumstance on Lithium-Ion Battery and the Application of Phase Change Material

Experimental investigation on mitigation of thermal runaway propagation of lithium-ion battery module with flame retardant phase change materials

Experimental Analysis on the Thermal Management of Lithium-Ion Batteries Based on Phase Change Materials

Insight into the Implication of High-Loading Mechanical Force on the Mechanical Bond

Research Progress of Enhancing Battery Safety with Phase Change Materials

An experimental study on the thermal performance of mixed phase change materials-based battery cooling system

Study on Thermal Runaway Risk Prevention of Lithium-Ion Battery with Composite Phase Change Materials

Investigation on the Properties of Flame-Retardant Phase Change Material and Its Application in Battery Thermal Management

Challenges in thermal management of lithium-ion batteries using phase change nanocomposite materials: A review

Thermal Performance of Pouch Lithium-ion Battery Module Cooled by Phase Change Materials

Organic and Inorganic Hybrid Composite Phase Change Material for Inhibiting the Thermal Runaway of Lithium-Ion Batteries

The effect of PCM on mitigating thermal runaway propagation in lithium-ion battery modules

Synergistic Performance Enhancement of Lead-Acid Battery Packs at Low- and High-Temperature Conditions Using Flexible Phase Change Material Sheets

Experimental Investigation on the Thermal Management for Lithium-Ion Batteries Based on the Novel Flame Retardant Composite Phase Change Materials

Phase change material selection using simulation-oriented optimization to improve the thermal performance of lithium-ion battery

Research on the performance failure of phase change materials thermal management for lithium battery

Experimental Study of Temperature Control Based on Composite Phase Change Materials during Charging and Discharging of Battery

Phase change materials for lithium-ion battery thermal management systems: A review