Abstract:Compression combustion engines are a source of air pollutants such as HC and Co, but are still widely used throughout the world. The use of renewable fuels such as ethanol, which is a low-carbon fuel, can reduce the emission of these harmful gases from the engine. A fundamental analysis is proposed in this research to experimentally examine the emission characteristics of diesel–ethanol fuel blends. Furthermore, a multi-objective genetic algorithm (e-MOGA) was developed based on the experimental data obtained to fine the most effective or Pareto set of engine emission and performance optimization solutions. So, the optimization problem had two inputs and seven objectives. For this purpose, input variables for the search space were S (rpm) varied in the range of (1600–2000) and E (%) varied in the range of (0–12). These design variables were chosen to be varied in a prespecified range with a lower and upper band as same as experimental conditions. A diesel engine using (DE2, DE4, DE6, DE8, DE10, and DE12) diesel–ethanol fuel blends, at the various speed of 1600 to 2000 rpm, was utilized for the experiment. The findings showed that the use of diesel–ethanol fuel blends decreased the concentration of CO and HC emissions by 3.2–30.6% and 7.01–16.25%, respectively, due to the high oxygen content of ethanol. As opposed to CO and HC emissions, the NOx concentration showed an increase of 7.5–19.6%. This increase was attributed to the high combustion quality in the combustion chamber, which resulted in a higher combustion chamber temperature. The optimization results confirmed that the shape of the Pareto front obtained from multi-objective ε-Pareto optimization could be convex, concave, or a combination of both. A new parameter was introduced as emission index or EI for selection of the best solution among the Pareto set of solutions. This parameter had a minimum value of 4.61. The variables levels for this optimum solution were as follows: engine speed = 1977 rpm, ethanol blend ratio = 10%, CO = 0.27%, CO2 = 6.81%, HC = 3 ppm, NOx = 1573 ppm, SFC = 239 g/kW·h, P = 56 kW, and T = 269.9 N·m. The EI index had a maximum value of 8.26. Conclusively, we can say that the optimization algorithm was successful in minimizing emission index for all ethanol blend ratios, especially at higher engine speeds.

Computational Modeling and Multi-objective Optimization of Engine Performance with Waste Soya Oil-Based Biodiesel Using Genetic Algorithm and Utility Function

Modelling of compression ignition engine by soft computing techniques (ANFIS-NSGA-II and RSM) to enhance the performance characteristics for leachate blends with nano-additives

Multi-objective Parameter Optimization of Four-Stroke Diesel Engine with Waste Cooking Oil Biodiesel and Diesel Blend using RSM-NSGA-II

Multi-objective optimization of ternary blends of Algal biodiesel-diesel-1-decanol to mitigate environmental pollution in powering a diesel engine using RSM, ANOVA, and artificial bee colony

Comparative Study of Soft Computing and Metaheuristic Models in Developing Reduced Exhaust Emission Characteristics for Diesel Engine Fueled with Various Blends of Biodiesel and Metallic Nanoadditive Mixtures: An ANFIS-GA-HSA Approach

Multi-objective optimization of a diesel engine-ORC combined system integrating artificial neural network with genetic algorithm

Multi-objective optimization of the performance and emissions characteristics of a CI engine powered by Pyrus glabra biodiesel as a novel feedstock using response surface method

Optimization of engine performance, emission and combustion parameters by using mixed nonedible oil biodiesel with nano-additives using hybrid techniques

A Taguchi-based hybrid multi-criteria decision-making approach for optimization of performance characteristics of diesel engine fuelled with blends of biodiesel-diesel and cerium oxide nano-additive

Combustion exhaust release impact, diesel engine performance, and optimization studies of green diesel-petrodiesel blend in a high compression ratio direct-injection compression-ignition engine

The Influence of Diesel–Ethanol Fuel Blends on Performance Parameters and Exhaust Emissions: Experimental Investigation and Multi-Objective Optimization of a Diesel Engine

An Efficient Data-Driven Approach for Modeling and Optimization of Reactivity-Controlled Compression Ignition Engine Fueled with Polyoxymethylene Dimethyl Ethers and Hydrogen

Multi-objective Optimization of the Atkinson Cycle Gasoline Engine Using NSGA Ⅲ Coupled with Support Vector Machine and Back-Propagation Algorithm

A comparative study of biodiesel engine performance optimization using enhanced hybrid PSO–GA and basic GA

Exploring the Environmental and Performance Implications of Utilizing Waste Swine Oil Biodiesel in CI Engines

Multi-Optimization of Injection Parameters Affecting Emissions in a Diesel Engine Fueled with Fischer–Tropsch Fuel Based on NSGA-II

Artificial neural network based forecasting of diesel engine performance and emissions utilizing waste cooking biodiesel

Optimization of biodiesel production parameters for hybrid oil using RSM and ANN technique and its effect on engine performance, combustion, and emission characteristics

Integrated optimization of common rail direct injection diesel engine input parameters with linseed biodiesel: A hybrid approach using grey relational analysis and genetic algorithm techniques

Exploring the Exhaust Emission and Efficiency of Algal Biodiesel Powered Compression Ignition Engine: Application of Box–Behnken and Desirability Based Multi-Objective Response Surface Methodology

Prediction and optimization of dual-fuel marine engine emissions and performance using combined ANN with PSO algorithms