Abstract:The current study is performed to find sustainable solutions for the future of transportation and environmental well-being. Both conventional methods and experimental design table (L16 Orthogonal Array) techniques have been employed to examine and optimize a diesel-powered engine's operational and pollutant parameters. The L16 Orthogonal Array is obtained through Taguchi's experimental design approach using Minitab 16 software. The experimental design incorporated three control variables, namely engine speed, fuel type, and engine load, each with four levels. The operational parameters, namely brake thermal efficiency (BTE) and brake specific fuel consumption (BSFC), as well as the emission characteristics, including hydrocarbon (HC), carbon monoxide (CO), nitrogen oxide (NO), and smoke emissions, were acquired using the L16 orthogonal array (OA) and subsequently examined. The utilization of methodologies such as signal-to-noise (S/N) ratio and grey analysis was employed to determine the optimal operational state of the engine to achieve maximum performance while minimizing emissions. The engine's ideal state of operation, in terms of BTE and BSFC, was determined to be at 75% engine load, 1000 r/min engine speed, and using 10 −4 (in vol) carbon nanotube incorporated 20% orange peel biodiesel (OPB20CNT100) blended fuel (A3-B1-C4). The study indicated that engine load significantly influenced BTE and BSFC, with 84.05% and 87.79% contribution factors, respectively. At 25% engine load, 1000 r/min, and OPB20CNT100 fuel (A1-B1-C4) CO, smoke, NO, and HC emissions were the lowest. Engine load affects emissions the most. Engine BSFC increased 3.10% and NO emissions 1.77%. BTE, CO, smoke, and HC emissions decreased by 1.9%, 12.29%, 47.05%, and 47.22%, respectively, at optimal operating conditions concerning diesel fuel. This study shows that Taguchi-Grey's experimental design optimizes diesel engine operational and pollutant attributes. The outcomes revealed that orange peel biodiesel infused with CNT can replace diesel fuel in an environmentally friendly way. This alternative fuel could clean and improve transportation.

Multi-objective Parameter Optimization of Four-Stroke Diesel Engine with Waste Cooking Oil Biodiesel and Diesel Blend using RSM-NSGA-II

Multi-objective optimization of ternary blends of Algal biodiesel-diesel-1-decanol to mitigate environmental pollution in powering a diesel engine using RSM, ANOVA, and artificial bee colony

Optimisation of an experimental and feasibility research on a CRDI diesel engine based on a blend of waste cooking oil and waste plastic oil using RSM: A value addition for disposed waste oil

Computational Modeling and Multi-objective Optimization of Engine Performance with Waste Soya Oil-Based Biodiesel Using Genetic Algorithm and Utility Function

Integrated optimization of common rail direct injection diesel engine input parameters with linseed biodiesel: A hybrid approach using grey relational analysis and genetic algorithm techniques

Modelling of compression ignition engine by soft computing techniques (ANFIS-NSGA-II and RSM) to enhance the performance characteristics for leachate blends with nano-additives

Multi-objective Optimization of Emission Parameters of a Diesel Engine Using Oxygenated Fuel and Pilot Injection Strategy Based on RSM-NSGA III

Multi-objective RSM-based optimization of diesel-diethyl ether blends in diesel engine to achieve sustainable development goals

Optimization of engine performance, emission and combustion parameters by using mixed nonedible oil biodiesel with nano-additives using hybrid techniques

A Taguchi-based hybrid multi-criteria decision-making approach for optimization of performance characteristics of diesel engine fuelled with blends of biodiesel-diesel and cerium oxide nano-additive

Optimization of diesel engine performance and emission characteristics with cerium oxide nanoparticles mixed waste cooking oil biodiesel blends

Analysis and Optimization of Operational and Pollutant Attributes of Diesel Engine with CNT-Infused Orange Peel Biodiesel-Diesel Blend Fuel

Performance analysis and optimization of thermal barrier coated piston diesel engine fuelled with biodiesel using RSM

Model-prediction and Optimization of the Performance of a Biodiesel – Producer Gas Powered Dual-Fuel Engine

Multi-Optimization of Injection Parameters Affecting Emissions in a Diesel Engine Fueled with Fischer–Tropsch Fuel Based on NSGA-II

Multi-objective Optimization of the Atkinson Cycle Gasoline Engine Using NSGA Ⅲ Coupled with Support Vector Machine and Back-Propagation Algorithm

Parameter optimisation of marine four-stroke engine EGR systems using RSM and NSGA-III

Optimization of biodiesel production parameters for hybrid oil using RSM and ANN technique and its effect on engine performance, combustion, and emission characteristics

Diesel Engine Performance and Emission Parameters Optimization Using Taguchi and Response Surface Methodology

Effective utilization of waste plastic derived fuel in CI engine using multi objective optimization through RSM

Improvements of Performance and Emission Characteristics of a Diesel Engine Fueled with Diesel/pode3/n-Butanol Blended Fuels by RSM-NSGA III in Plateau Environment