Abstract:Carbon fibre reinforced plastics (CFRPs) are susceptible to various cutting damages. An accurate model that could efficiently predict the material removal and chip formation mechanisms will thus help to reduce the damages during cutting and further improved machining quality can be pursued. In previous studies, macro numerical models have been proposed to predict the orthogonal cutting of the CFRP laminates with subsurface damages under quasi-static loading conditions. However, the strain rate effect on the material behaviours has rarely been considered in the material modelling process, which would lead to the inaccurate prediction of the cutting process and damage extent, especially at high cutting speed. To address this issue, a novel material failure model is developed in this work by incorporating the strain rate effect across the damage initiation (combined Hashin and Puck laws) and evolution criteria. The variation in material properties with the strain rate is considered for the characterization of the stress-strain relationships under different loading speeds. With this material model, a three-dimensional macro numerical model is established to simulate the orthogonal cutting of CFRPs under four typical fibre cutting angles. The machining process and cutting force simulated by the proposed model are well agreed with the results of the CFRP orthogonal cutting experiments, and the prediction accuracy has been improved compared with the model without considering the strain rate effect. In addition, the effects of processing conditions on the subsurface damage in machining CFRPs under 135° are assessed. The subsurface damage is found to decrease with the cutting speed increases to 100 mm/s, afterwards, it tends to be stable when the cutting speed is over 100 mm/s. The increased severity of the subsurface damage is predicted with the higher cutting depths.

Establishment of instantaneous milling force prediction model for multi-directional CFRP laminate

Modeling and Analysis of Force Prediction in Milling Process of Unidirectional Fiber Reinforced Polymer Composites

An analytical approach to cutting force prediction in milling of carbon fiber reinforced polymer laminates

Modeling of dynamic milling forces considering the interlaminar effect during milling multidirectional CFRP laminate

Milling Force Prediction Model Development for CFRP Multidirectional Laminates and Segmented Specific Cutting Energy Analysis

Modeling about milling force for multidirectional CFRP based on theory of superposition

Considering the Bottom Edge Cutting Effect of the Carbon Fiber Reinforced Polymer Milling Force Prediction Model and Optimization of Machining Parameters

Theoretical model of instantaneous milling force for CFRP milling with a ball-end milling cutter: Considering spatial dimension and temporal dimension discontinuity effects

Parametric Prediction Model and Periodic Fluctuation Interpretation of Unidirectional CFRP Edge Milling Force

Tool Wear Prediction in Milling CFRP with Different Fiber Orientations Based on Multi-Channel 1DCNN-LSTM

Development of Cutting Force Prediction Model for Vibration-Assisted Slot Milling of Carbon Fiber Reinforced Polymers

Analysis of Burr and Tear in Milling of Carbon Fiber Reinforced Plastic (CFRP) Using Finite Element Method

A Mechanistic Model for Cutting Force in Helical Milling of Carbon Fiber-Reinforced Polymers

Microscopic mechanism based force prediction in orthogonal cutting of unidirectional CFRP

Modeling and simulation of milling forces in milling plain woven carbon fiber-reinforced plastics

A Cutting Force Predicting Model in Orthogonal Machining of Unidirectional CFRP for Entire Range of Fiber Orientation

Development of a Generalized Cutting Force Prediction Model for Carbon Fiber Reinforced Polymers Based on Rotary Ultrasonic Face Milling

High-speed milling of CFRP composites: a progressive damage model of cutting force

An Energy Based Force Prediction Method for UD-CFRP Orthogonal Machining

Numerical prediction of the chip formation and damage response in CFRP cutting with a novel strain rate based material model

Establishment of Analytical Model for CFRP Cutting Force Considering the Radius of the Edge Circle