Abstract:In order to achieve desired mechanical properties of alloys by manipulating grain boundaries (GBs) via solute decoration, it is of great significance to understand the underlying mechanisms of microstructural evolution and plastic deformation. In this work, nanocrystalline (NC) Cu-W alloyed films with W concentrations spanning from 0 to 40 at% were prepared by using magnetron sputtering. Thermal stability (within the temperature range of 200 °C-600 °C) and hardness of the films were investigated by using the x-ray diffraction, transmission electron microscope (TEM) and nanoindentation, respectively. The NC pure Cu film exhibited substantial grain growth upon all annealing temperatures. The Cu-W alloyed films, however, displayed distinct microstructural evolution that depended not only on the W concentration but also on the annealing temperature. At a low temperature of 200 °C, all the Cu-W alloyed films were highly stable, with unconspicuous change in grain sizes. At high temperatures of 400 °C and 600 °C, the microstructural evolution was greatly controlled by the W concentrations. The Cu-W films with low W concentration manifested abnormal grain growth (AGG), while the ones with high W concentrations showed phase separation. TEM observations unveiled that the AGG in the Cu-W alloyed thin films was rationalized by GB migration. Nanoindentation results showed that, although the hardness of both the as-deposited and annealed Cu-W alloyed thin films monotonically increased with W concentrations, a transition from annealing hardening to annealing softening was interestingly observed at the critical W addition of ∼25 at%. It was further revealed that an enhanced GB segregation associated with detwinning was responsible for the annealing hardening, while a reduced solid solution hardening for the annealing softening.

Thermal Stability of Grain Structure for Ag Nanotwinned Films Sputtered With Substrate Bias

Thermal Stability and Grain Growth of Nanocrystalline Metal Silver

The W alloying effect on thermal stability and hardening of nanostructured Cu-W alloyed thin films

Kinetic study of grain growth in highly (111)-preferred nanotwinned copper films

Abnormal Grain Growth Behavior in Gradient Nanostructured Titanium Investigated by Coupled Quasi-in-situ EBSD Experiments and Phase-Field Simulations

Thermal Stability of Nanocrystalline Grains in Cu-W Films

Effect of Thermal Stress on Anisotropic Grain Growth in Nano-Twinned and Un-Twinned Copper Films

Stress Relaxation and Grain Growth Behaviors of (111)-Preferred Nanotwinned Copper during Annealing

Thermal Stability and Microstructure Evolution in Nanocrystalline Ti-5Al-2Sn-2Zr-4Mo-4Cr – A HRTEM Study

Effect of biaxial strain on grain growth in nanocrystalline films: Coupling between grain-boundary energy and strain energy

Thermal stability of phase-separated nanograin structure during heat treatment

Tailoring the Thermal Stability of Nanocrystalline Ni Alloy by Thick Grain Boundaries

Length Scale Effect on the Thermal Stability of Nanoscale Cu/Ag Multilayers

Lattice Distortion and Thermal Stability of Nano-Crystalline Copper

Tailoring Nanostructured Ni-Nb Metallic Glassy Thin Films by Substrate Temperature

Grain Size Effects on Microstructural Stability and Creep Behaviour of Nanotwinned Ni Free-Standing Foils at Room Temperature

Thermal Stability of Bulk Nanocrystalline Ti–10V–2Fe–3Al Alloy

High Thermal Stability of Nanostructured Al Mediated by Heterophase Interfaces and Nanotwinning

Substrate Temperature Effect on Growth Behavior and Microstructure-Properties Relationship in Amorphous Ni-Nb Thin Films

Competition between surface and strain energy during grain growth in free-standing and attached Ag and Cu films on Si substrates

Unraveling Thermodynamic and Kinetic Contributions to the Stability of Doped Nanocrystalline Alloys using Nanometallic Multilayers