Abstract:In order to in-depth study the surface morphology formation mechanism and surface quality control methods of fused silica repaired sites, numerical simulation and experimental method were firstly used to analyze the process of CO2 laser rapid ablation mitigation, as well as the relationships between processing parameters, repaired angle and surface quality. Then the physical problems of the heat-affected zone, fictive temperature and structure relaxation under the irradiation of pulsed laser were studied through the mathematical model and Raman spectroscopy system. The studies found that the fixed depth morphology was formed starting from the third track’s laser scanning during the processing of fused silica by the pulsed laser that moved according to the arc trajectory. The bottom of the processed morphology presented uneven concave-convex features, which was different from the uniform topography formed by the laser linear scanning processing. The processing angle decreased as the trajectory indentation increased, while there was no clear variation law between the processed surface quality and the indentation. The thickness of the heat-affected zone characterized by the fictive temperature was consistent with the experiment, and it was proportional to the laser pulse width. The negative factors caused by the thermal effect in the laser repair process could be suppressed by reducing the laser pulse width. These studies can provide guidance for the optimization of the CO2 laser repair process and the improvement of the repaired surface quality.

Crystallographic and morphological textures in laser surface modified alumina ceramic

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Surface Treatment of Alumina-Based Ceramics Using Combined Laser Sources

Flame-Assisted Laser Polishing of Alumina Ceramic Surface Properties

The surface softening mechanism of AlN ceramic by laser treatment

Alpha alumina synthesis by laser treatment of bi-phasic nanowires

Damage Morphologies of Al2O3 and Fe Particles Attached on the Input Surface of Fused Silica after Irradiation by a 355 Nm Laser.

Laser surface texturing of ceramics and ceramic composite materials – A review

Fabrication of Interference Textures on Cemented Carbides Using Nanosecond and Femtosecond Laser Pulses

Nonlinear optical effects in polycrystalline transparent Al2O3 ceramics using femtosecond laser pulses—supercontinuum generation and laser damage

Effects of femtosecond laser surface texturing on mechanical properties and low temperature degradation of alumina toughened zirconia

Femtosecond laser surface modification of magnesium aluminate spinel and its effect on polishing

Surface modification of IN713 LC superalloy with Metco 204NS by laser surface alloying

Effects of Surface Laser Treatment on Flashover Characteristics Across Alumina Ceramics in Vacuum

Morphology evolution mechanisms and localized structural modification of repaired sites on fused silica optics processed by CO2 laser rapid ablation mitigation

Tribological behavior of zirconia ceramic with micro-channels produced by nanosecond laser

Hierarchical microtextures generated by pulsed-laser manufacturing for surface geometry modulation

Laser Ablation Study of Cutting Ceramics with Consideration of the Beam Inclination Angle

Influence of surface morphology on processing of C/SiC composites via femtosecond laser

A REVIEW ON LASER MACHINING OF ALUMUNIA CERAMIC

Numerical and Experimental Investigation of Morphological Modification on Fused Silica Using CO2 Laser Ablation